What’s on everyone’s wish lists? (Guns)

[M92PV4U]

can it be guns i want to sell? here you go, then.

1) Sako TRG-22 in 308
2) AI AX turnkey setup with 260 Rem barrel and ATACR
3) Zatava M72 AK pistol
4) FN SPR custom build in Mcmillan stock in 308
5) Weatherby in 250 Savage, Lilja Barrel, Swarovski

What's a Zatava M72 AK pistol?

Different from a PAP M92 AK pistol?

 

[Roc Doc]

I'm pretty lucky, I have three infinity pistols. and they are by far my favorites. I would like a single stack 9mm from them. I have a factory colt m16 that is mint. and a shit ton of other guns that are fun to play with. but I would like a mp5, most enjoyable shooting sub machine gun I have ever played with. if I get another windfall I will have one.

At Frontsite they have a paid MG shoot at lunchtime. Usually a MP5, Tommygun, a M16 and an AK.

Only the AK and the MP5 will be running on any given day.

 

[Texas97]

What's a Zatava M72 AK pistol?

Different from a PAP M92 AK pistol?

It's what happens when you make a typo. Yes, m92

 

[TrikeKid]

It's what happens when you make a typo. Yes, m92

I was wondering how you make a pistol out of an RPK

 

[gozuki]

I was wondering how you make a pistol out of an RPK

I'll post pics

 

[gozuki]

For a minute I thought someone else did one too, but clarified with Texas97

 

[Ebs]

It's what happens when you make a typo. Yes, m92

Any issues with yours? I don't have anything in x39. Was thinking about something in a shorter barrel like a Zastava pistol, or Bren 2, or CMMG mk47.

 

[Texas97]

Any issues with yours? I don't have anything in x39. Was thinking about something in a shorter barrel like a Zastava pistol, or Bren 2, or CMMG mk47.

No issues. Runs like an AK should

 

[M92PV4U]

Any issues with yours? I don't have anything in x39. Was thinking about something in a shorter barrel like a Zastava pistol, or Bren 2, or CMMG mk47.

No issues with mine.

 

[gozuki]

I've had no problems in the dozen or so x39 AK pistols I've bought and built.

I built a PSL pistol that I cut up after I almost lost some fingers lol

 

[DavidVanVorous]

Im a believer in DIY so my needs are more in the parts to build rather than immediate gratifications.
High figure curly maple blank long enough to build a full stock flinter.
Davis double set trigger and Hawken guard casting
Fiddly bits (screws and such)
3/8" hickory dowel (nothin' like a good piece of hickory)
.50 cal Douglas or Green Mountain 36" tapered barrel and breach assembly

Cost? I figure right around $1000.

 

[Weasel]

Any issues with yours? I don't have anything in x39. Was thinking about something in a shorter barrel like a Zastava pistol, or Bren 2, or CMMG mk47.

Mine run good as well.

I just was looking at a KS47 so add that to my list as well.

I'd like a around 5" 556 or AK pistol thing at some point. Something that can stuff in a bag. I guess can be done with a pistol cal as well but x39 seems more better.

 

[pennsylvaniaboy]

I'm a simple man

30-30 levergun
glock 17
mossberg 590 retrograde as well

 

[Aisin]

Mine run good as well.

I just was looking at a KS47 so add that to my list as well.

I'd like a around 5" 556 or AK pistol thing at some point. Something that can stuff in a bag. I guess can be done with a pistol cal as well but x39 seems more better.

5 inch 5.56 will keyhole at 35 yards. Absolute waste of time.

 

[Ebs]

12" barrel VZ58 is lookin' about right:

 

[gt1guy]

Son will be picking up my new POF Revolution in 308 on the 11th. So it will be waiting for me when I get back home.

Next up is going to be a Barrett MRAD.

 

[Thefishguy77]

Shotgun primers and powder to become available at a acceptable price.

 

[gt1guy]

Son will be picking up my new POF Revolution in 308 on the 11th. So it will be waiting for me when I get back home.

Next up is going to be a Barrett MRAD.

And it's waiting at home now.

7.5lbs, .308, 16.5"bbl, ambi everything. An AR15 upper will actually fit on it and the take down pins will go in, just to give a reference of the size.

Other things I got for it are a Magpul UBR stock, Geissele high speed national match 2 stage trigger, Spuhr scope mount, Schmidt & Bender PMII 3-27x56 scope and a 45* RMR red dot mount that attaches to the scope mount.

 

[Weasel]

5 inch 5.56 will keyhole at 35 yards. Absolute waste of time.

well scratch one off the list but I have 2 more to add

KS47 and a VZ58

 

[Ebs]

I want to like that KS47 but they're on like gen 3 of that thing already fixing problems. Check out CMMG's MK47, they build it based off 308 AR stuff so it's way stronger.

 

[Ebs]

SG553R I wouldn't hate to have either. Imported in small numbers as a pistol as SG553RP.

 

[Weasel]

um no idea that existed! I know Sig USA made a 556r for a bit.

 

[Gatorgrizz27]

And it's waiting at home now.

7.5lbs, .308, 16.5"bbl, ambi everything. An AR15 upper will actually fit on it and the take down pins will go in, just to give a reference of the size.

Other things I got for it are a Magpul UBR stock, Geissele high speed national match 2 stage trigger, Spuhr scope mount, Schmidt & Bender PMII 3-27x56 scope and a 45* RMR red dot mount that attaches to the scope mount.

GTFO of here! This isn’t a “look at what I just bought” thread. It’s mental masturbation for the poors or those of us with self control.

 

[Gatorgrizz27]

SG553R I wouldn't hate to have either. Imported in small numbers as a pistol as SG553RP.

WANT. Wife wants diamond earrings for Christmas and keeps sending me other stuff on top of it. I’ve sent her a set of Tekton wrenches and a $180 WEN workbench. Where can you find one? Zero on gun broker. Sirch takes you to Sig Germany’s website.

Was on the verge of buying a CZ Bren in 7.62x39 until I found the Sage Dymanics review where he talked about how much the gun hated being suppressed and was shooting massive fireballs out of the ejection port.

 

[VG SERE]

WANT. Wife wants diamond earrings for Christmas and keeps sending me other stuff on top of it. I’ve sent her a set of Tekton wrenches and a $180 WEN workbench. Where can you find one? Zero on gun broker. Sirch takes you to Sig Germany’s website.

Was on the verge of buying a CZ Bren in 7.62x39 until I found the Sage Dymanics review where he talked about how much the gun hated being suppressed and was shooting massive fireballs out of the ejection port.

Easily fixed. The gas selector has 3 positions. OFF/NORMAL/DIRTY becomes SUPPRESSED/NORMAL/DIRTY.

 

[VG SERE]

Nemo Arms NX O/U Shotgun

Voodoo Ravage .22

Ruger Guide Gun .375 Ruger left hand

Staccato C2

Benelli M2 by Taran Tactical

Enough Ammo to become excellent with each! (This really blows the whole budget!)

Price is shockingly reasonable for each. Call it $15k with glass

 

[BDK]

I have most of the guns I want, but I would like;

*Another M1 Garand

*M1 Carbine

*Nice over/under skeet gun

*Winchester 1893 in 30-30, decent shooter grade, nothing too nice that it doesn't get used

*Good bolt action long distance rifle

Am actively looking for the 1893, just haven't found the right one yet. A friend of mine is a estate sale liquidator and comes across old guns on a regular basis. He knows I want one.

 

[smurfblue40]

Mrs sent me this a couple months ago after we figured out she had a hard time working the action of the 9mm I keep handy “Just in case”. (Now it’s the Mossberg)

I just poked around on a local gun dealer website and they had one, so I bought it 😎🇺🇸
* checked off Mrs wish list

 

[gt1guy]

GTFO of here! This isn’t a “look at what I just bought” thread. It’s mental masturbation for the poors or those of us with self control.

Self control and wish list do not go together. Self control only holds you back, just let it go.

 

[Gatorgrizz27]

Self control and wish list do not go together. Self control only holds you back, just let it go.

Trust me, I did FAR more than my share of stimulating the firearms and ammunition economy last year thanks to Biden. Been doing a better job of saving for land this year.

It still makes me smile thinking about if we could give Hillary, Obama, and Biden the numbers of guns and magazines they’ve put on the streets people would otherwise never have purchased. 😄