cagcig
Well-known member
Who sells a decent ford super duty unit bearing without breaking the bank? Prices are all over the board.
-
Last Call Guest on these Group Buy Deal Items from Baja Designs
-
We're moving data around, images may be off/on over the next few hours. Nothing is lost aaand no ... Nothing will Change Fo2
pennsylvaniaboy
make fullsizes great again
- Joined
- Jun 27, 2020
- Messages
- 1,451
welndmn
Well Done Man
I can't remeber the name, but I bought an undrilled one from one of the vendors that drills them for 8 on 6.5".
I am just so worried about fakes out there, i figure those guys have a legit vendor
I am just so worried about fakes out there, i figure those guys have a legit vendor
Burns
Well-known member
I got about 25k miles on the cheapest ones on RockAuto before I needed to swap them out 
pennsylvaniaboy
make fullsizes great again
- Joined
- Jun 27, 2020
- Messages
- 1,451
whats that translate to in trail miles?I got about 25k miles on the cheapest ones on RockAuto before I needed to swap them out
pennsylvaniaboy
make fullsizes great again
- Joined
- Jun 27, 2020
- Messages
- 1,451
If I would redrill my sterling id prolly do that
Bebop
Well-known member
- Joined
- May 26, 2020
- Messages
- 6,335
It really depends how you drive.whats that translate to in trail miles?
I've killed some cheap ones in 6 months and 4 trips.
Big4x4ride
Red Skull
I have a 99-04 axle in my rig, I'm running bored out Timkens currently (bought from Branik), they are 2 years old, 5000 street miles or so, 7 days in Moab on them, and 8 or so other wheeling trips. No complaints, I just pulled them actually to inspect them and the bushings and all was great. This is in a JKU on 40's.
Buddy has a JKU on 39's, he's had Mevotechs bought of RockAuto in for 2 years. Same amount of wheeling trips, and same 7 days in Moab, but less than 1000 miles on the street. No issues there either. They've been through multiple stub shaft breaks and locking hub breaks as well. We recently bored these out and they have 1 wheeling trip on them since then with no problems.
I carry a bored out Mevotech also from RockAuto for a spare, and recently bought a couple of SKF off RockAuto for a future build. They appear to be good visually and feel fine, the box does say Made in China on it though. I'll bore them out here in a few weeks and hope for the best.
I'll be honest, 95% of my parts come from Rockauto for all of our vehicles now. I can get name brands there for sometimes 1/2 the price of local parts stores. Only downside it the warranty replacement is more difficult, and cores are a pain to deal with if needed.
Buddy has a JKU on 39's, he's had Mevotechs bought of RockAuto in for 2 years. Same amount of wheeling trips, and same 7 days in Moab, but less than 1000 miles on the street. No issues there either. They've been through multiple stub shaft breaks and locking hub breaks as well. We recently bored these out and they have 1 wheeling trip on them since then with no problems.
I carry a bored out Mevotech also from RockAuto for a spare, and recently bought a couple of SKF off RockAuto for a future build. They appear to be good visually and feel fine, the box does say Made in China on it though. I'll bore them out here in a few weeks and hope for the best.
I'll be honest, 95% of my parts come from Rockauto for all of our vehicles now. I can get name brands there for sometimes 1/2 the price of local parts stores. Only downside it the warranty replacement is more difficult, and cores are a pain to deal with if needed.
TTRAxle&FAB
Yellow Skull
- Joined
- Mar 15, 2023
- Messages
- 236
8x170s timkens off rockauto.com are like $310ea
I can sell 8x6.5 timkens for $450ea with 9/16 studs.
Cheap rockauto.com specials 8x6.5 with 9/16 studs $285ea
M14 studs $250
Duralast Gold series 8x6.5
9/16 studs $235
M14 studs $200
