Steering Angle Sensor Reset? - 2007 Silverado 1500

[RC4x4]

Replaced the stereo rack a while back.
Now when turning right at full lock I get a bunch of lights and warnings that say Stabilitrak Off, Traction Control Off, Service Stabiltrak, Service Traction Control.

I know the steering wheel didn’t turn when I swapped the rack. I put the seatbelt through it. And the rack was centered when I put it in. I measured the sides.

I think I just need to have the sensor re calibrated. Does that sound right? My scan tool doesn’t have that function so will have to take it in unfortunately. Unless the truck should be able to relearn it itself?

 

[91samurai]

The knock off bi directional scan tools are getting cheap enough on Amazon you may be able to buy one for the ~$150 bucks you will get charged to have a shop relearn it.

 

[Skinny]

Wouldn't any dealer do that automatically if aligning it?

 

[RC4x4]

I got one of those cheap bi directional scan tools but it doesn’t support that function unfortunately.

I just set the toe myself after replacing the rack so no dealers involved.