And the ease of running a 1/4-20 thru the middle of the light into whatever body/mount you desire.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Rocklight kit, or buy individual lights?
- Thread starter Winchested
- Start date
-
- Tags
- kit
Exactly. Front and rear lights I just used existing holes that mount other shit and the middle ones are attached to the body mounts. I don’t have any experience with the Amazon lights but the kc lights are tiny and throw out a lot of light.
smracing
Well-known member
- Joined
- May 20, 2020
- Member Number
- 655
- Messages
- 93
I just shortened 8 of them. There are 5 each about 28ga wires. Easy money if you are not a moron.
Bebop
Well-known member
- Joined
- May 26, 2020
- Member Number
- 1458
- Messages
- 4,847
KC is the only rocklight I'll run. They're awesome.
Reasons why I like Cyclones :
18awg wires
Potted
Winchested
IH Scout SSII
- Joined
- Jun 19, 2020
- Member Number
- 2128
- Messages
- 1,405
I've done that before, too. And then 10 months later the garbage control pack goes retarded and they're all junk anyhow. Fuck the gay party lights on rock crawlers.
YotaAtieToo
Thick skull
I thought this was where all the morons hung out?
Obviously you have more patience than me.
94toytruck
Eastcoast crawler
I have 4 KC Cyclones, 1 mounted above each wheel. High enough up that they don't get damaged. They were like $25 a pop but honestly a year later they still look and work like new.
Winchested
IH Scout SSII
- Joined
- Jun 19, 2020
- Member Number
- 2128
- Messages
- 1,405
Well the cheap cu*t in me ordered these LEDMIRCY LED Rock Lights White Kit for Off Road Truck Auto Car Boat ATV SUV Waterproof High Power Underbody Glow Neon Trail Rig Lights Underglow Lights Shockproof(8PCS-White) Amazon.ca
A 33' roll of 18ga wire and a switxh/relay kit for $100 cdn.
Ill update once they're installed.
A 33' roll of 18ga wire and a switxh/relay kit for $100 cdn.
Ill update once they're installed.
chaplinfj60
Well-known member
has anyone made a KC cyclone mount and 3d printed it yet?
but you dont need the extra mount, there is a screw hole in the center correct?
but you dont need the extra mount, there is a screw hole in the center correct?
Mike Honcho
Red Skull Member
I have these on mine, they are well made and bright. Hope they last but at that price I ordered a few extra if i get some that fail.
I used this wire for mine to a Auxbeam 8 gang switch panel.
Amazon.com
www.amazon.com
chaplinfj60
Well-known member
10 ga for LEDs or am i missing something with your load. or is it cheap enough you dont mind. 
Bebop
Well-known member
- Joined
- May 26, 2020
- Member Number
- 1458
- Messages
- 4,847
10 ga for LEDs or am i missing something with your load. or is it cheap enough you dont mind.
Last edited:
Mike Honcho
Red Skull Member
10 ga for LEDs or am i missing something with your load. or is it cheap enough you dont mind.
Scroll over, fucker. I used 18ga
chaplinfj60
Well-known member
the link popped up default at 10 i did not look any more. lol
Scroll over, fucker. I used 18ga
I have seen some offered as tube clamp setups intended for dome lights.
But yes, the center hole accepts hardware.
chaplinfj60
Well-known member
dome light these work excellent. and you use as a flash light if needed by unclipping it.
Amazon.com
www.amazon.com
Attachments
Squamch
Canadian
They used to be $25/4. I find the bracket to light body connection sucks though. Screws back out, or strip, or break, etc. Pissed me off to no end.
Winchested
IH Scout SSII
- Joined
- Jun 19, 2020
- Member Number
- 2128
- Messages
- 1,405
Ya double to triple any price on amazon.com + the turds fees.
Winchested
IH Scout SSII
- Joined
- Jun 19, 2020
- Member Number
- 2128
- Messages
- 1,405
Good to know. Thanks. Should be here Sunday. Got some more fender cutting to do then will start the install next week.
Winchested
IH Scout SSII
- Joined
- Jun 19, 2020
- Member Number
- 2128
- Messages
- 1,405
That's the stuff I ordered in 18 awg too but from the Canuck site.
I rock these cheap LEDs with great luck
Attachments
Etyler2
Your kind of Asshole
Just ordered 8 of these.Those 4" ones are too long for what I've already fab'd up for brackets
Found these too, look better then the little round penny light ones.
MICTUNING C2 Curved White LED Rock Lights - 4 Pods Underglow Lights Compatible for Car Truck Offroad ATV UTV Boat Amazon.ca
More expensive but look better for light output.
Winchested
IH Scout SSII
- Joined
- Jun 19, 2020
- Member Number
- 2128
- Messages
- 1,405
They do look good but mounts holes are 3.1" c to c. I'm in the 2.5" c to c range for where I needed to mount them. But ya they look stellar.
YotaAtieToo
Thick skull
Those 4" ones are too long for what I've already fab'd up for brackets
Found these too, look better then the little round penny light ones.
MICTUNING C2 Curved White LED Rock Lights - 4 Pods Underglow Lights Compatible for Car Truck Offroad ATV UTV Boat Amazon.ca
More expensive but look better for light output.
I'm a believer that not all cheap lights are created equal. That mictunning brand is probably my favorite. I've bought thier 10w single pods, flush mount reverse lights and some 8" or so wide single row(actual spot beam) led bars that were all pretty damn good quality for the money.
ToyodaAddict1980
Well-known member
- Joined
- Mar 22, 2021
- Member Number
- 3706
- Messages
- 126
I'm in the process of wiring up some kc cyclones. Bought lights individually. I'm using these magnets to mount them, they really stick.
The white lens puts out alot of light. The colored lenses definitely reduce the light output. My only concern is if they will hold up to all the rain around here.
The white lens puts out alot of light. The colored lenses definitely reduce the light output. My only concern is if they will hold up to all the rain around here.
ridered3
Low Talent Wheelin
No affiliation or experience with these, but saw this on a FaceSpace off-road group. Here’s a guy 3D printing tube mounts for the KC Cyclone rock lights.
urban3dprints.com
KC Cyclone Tube Mount | Car Tube Bracket Mount | Urban 3D
Get the perfect fit for your KC Cyclone Tube with our car tube bracket mount. Easy to install and durable. Shop now at Urban 3D for all your car accessory needs.
urban3dprints.com
Some of my cyclones have been mounted in the wheel well for over a year now and have held up to being blasted by snow, mud, rocks, and gravel… they are pretty tough.I'm in the process of wiring up some kc cyclones. Bought lights individually. I'm using these magnets to mount them, they really stick.
The white lens puts out alot of light. The colored lenses definitely reduce the light output. My only concern is if they will hold up to all the rain around here.
NDCjeepsmith
Red Skull Member
That guy actually makes a lot of cool stuff.No affiliation or experience with these, but saw this on a FaceSpace off-road group. Here’s a guy 3D printing tube mounts for the KC Cyclone rock lights.
KC Cyclone Tube Mount | Car Tube Bracket Mount | Urban 3D
Get the perfect fit for your KC Cyclone Tube with our car tube bracket mount. Easy to install and durable. Shop now at Urban 3D for all your car accessory needs.
ridered3
Low Talent Wheelin
That’s cool. I’d never heard of him until just randomly seeing it.
Winchested
IH Scout SSII
- Joined
- Jun 19, 2020
- Member Number
- 2128
- Messages
- 1,405
Decent little lights for the cost. However the rubber mounts that come with them are more like harder than hockey puck plastic.