Winchested
IH Scout SSII
- Joined
- Jun 19, 2020
- Member Number
- 2128
- Messages
- 1,197
Looking for someone that may have a type II style steering pump pulley laying around to measure the offset to the outside edge on the inside hub.
Basically PSC is telling me to buy their 5.75" pulley. But size for size going from a 4" V belt pulley with a 6.5" crank was 1.44:1 speed over driven.
Their 5.75 pulley will only over drive me 1.30:1.
I'd like to get a 5.25 to 5.5" pulley and have found a few .750 bore pulleys in that range but none of them list the offset. All are for type II pump.
The stock LS gm p pump pulley is a 7/8" offset. (6.125" pulley)
Long shot but someone may know.
Thanks.
Basically PSC is telling me to buy their 5.75" pulley. But size for size going from a 4" V belt pulley with a 6.5" crank was 1.44:1 speed over driven.
Their 5.75 pulley will only over drive me 1.30:1.
I'd like to get a 5.25 to 5.5" pulley and have found a few .750 bore pulleys in that range but none of them list the offset. All are for type II pump.
The stock LS gm p pump pulley is a 7/8" offset. (6.125" pulley)
Long shot but someone may know.
Thanks.