Motor Mounts

[Hodgiemoto]

Any recommendations for the best motor mounts that don’t vibrate the hell out of the truck?
Nuff said.

 

[YotaAtieToo]

Any recommendations for the best motor mounts that don’t vibrate the hell out of the truck?
Nuff said.

Stock with a chain, or cut the studs and drill for a through bolt. Only required on driver side.

All the aftermarket ones vibrate pretty bad.

 

[Aisin]

Stock with a chain, or cut the studs and drill for a through bolt. Only required on driver side.

All the aftermarket ones vibrate pretty bad.

Yep. I drilled mine out for half inch grade 8 bolts.

 

[TRINDU]

Stock style with through bolt, dont waste money on anything else

 

[Stingray]

X2 on all of the above.
I did "bomb proof" mounts all around on my 85 (motor and transfercase) and they may as well be solid steel. vibrate like hell. probably never break, but hell.
It it was a daily I would switch back.

 

[willis_racing]

X2 on all of the above.
I did "bomb proof" mounts all around on my 85 (motor and transfercase) and they may as well be solid steel. vibrate like hell. probably never break, but hell.
It it was a daily I would switch back.

Yerp. Same. I had LCE mounts for awhile and while and those were definitely dailyable, I broke the driver's side mount eventually while wheeling. Bomb proofs suck butt, but they don't break.

 

[Hodgiemoto]

Welp, got it done this past weekend. Pretty easy mod, should have done it years ago. Cost me zero dollars, already had a metric bolt the perfect size.

 

[GRM]

Anything but bomb proof mounts. I miss my old LCE mounts: sturdy but livable.

My current mounts are unbearable on long drives. I yearn for stock mounts again. I wish there was a better option.

 

[rugburn]

I have 4xInovations mounts and they don’t both me one bit