Mm200 to spoolmatic 2

[Sluggy]

Can anyone give me some info about using this spoolmatic 2 with my older millermatic 200? I've downloaded the original documents but I'm a little lost with proper setup or if this will even work with what I got. Here's the pictures, and hoping to make this work.

Is it just plug it in and hook up the power and go?

Any good info is much appreciated.

 

[Brad]

Take a picture of the front of the machine. It looks like the spoolgun has a tweco style quick connect What does the front of your machine have?

 

[Sluggy]

Take a picture of the front of the machine. It looks like the spoolgun has a tweco style quick connect What does the front of your machine have?

Sorry, finally made it to my shop, hope this helps. Appreciate anyone who can help me with this.

Front of the welder

This the aluminum attachment, I get that this plugs into the main welder power but I thought that it would have a heavier ground cable. Only has the gas hookup on the back.

 

[Twankie]

The small ground cable from the spoolgun box is just for signal. You will still need your main welder ground hooked up to do the work.

Other than that it looks like it should plug in and get to work

 

[SomeGuyFromOlympia]

Yes to above

set to remote
plug in your signal wire
plug in your man welding lead
ground will still be the same
connect your gas
change the panel setting to whatever you are doing