What's new
By:
Filters

Interesting Craigslist finds

HillbillyDeluxe said:
Uh, a 4wd dually flatbed would be pretty fuckin cool.
Click to expand...
It could be doable since the wheel bearings in a full floater and 4x4 front hub are the same. The issue would arise from the 6x7.25" bolt pattern making wheels over 14" nearly impossible to find from the factory and the hubs not having enough offset to run dually wheels up front. It could all be overcome with enough money though. :laughing:
 
DWT said:
It could be doable since the wheel bearings in a full floater and 4x4 front hub are the same. The issue would arise from the 6x7.25" bolt pattern making wheels over 14" nearly impossible to find from the factory and the hubs not having enough offset to run dually wheels up front. It could all be overcome with enough money though. :laughing:
Click to expand...
Swap front 4X hubs on to the rear?
 
DWT said:
It could be doable since the wheel bearings in a full floater and 4x4 front hub are the same. The issue would arise from the 6x7.25" bolt pattern making wheels over 14" nearly impossible to find from the factory and the hubs not having enough offset to run dually wheels up front. It could all be overcome with enough money though. :laughing:
Click to expand...
Any of the Japanese cabovers 6-lug? What's the bolt circle on those? Got enough meat on the hub flange to drill for that? That'll get you 19.5 :laughing:

bdkw1 said:
Swap front 4X hubs on to the rear?
Click to expand...
Then you lose the dually unless you somehow find a 6x5.5 dually rim
 
Grooved up 'birds!!!

1692146485639.jpeg


Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com www.facebook.com

Originally a geo tracker. 5 speed manual converted over to propane. Runs great. Good beginner crawler. Asking $5,200 O.B.O. Exploring my options. Open to trades. Push to start engine, full roll cage, windshield, LED's all around, rear winch, front winch mount and control already installed, Radio, storage, roll cage, rzr 5 point seats, race steering wheel that comes off, electrical disconnect switch, new shocks and muffler, new battery. Comes with lockable hubs as well. Tires hold pressure for a day or two, will need new ones if you plan on getting serious with it. Brakes are a little soft, never were bled, but they still stop.
 
arse_sidewards said:
Any of the Japanese cabovers 6-lug? What's the bolt circle on those? Got enough meat on the hub flange to drill for that? That'll get you 19.5 :laughing:
Click to expand...


Ford and I want to say IH used 6 x 7.25 back in the 60s so they're all split wheels. If I could find a set I'd cut the shells off and make dually 17 or 18s. I found a place that'll make aluminum wheels in my bolt pattern for $3500 but they're 22s and that's not what I'm after.
 
DWT said:
Ford and I want to say IH used 6 x 7.25 back in the 60s so they're all split wheels. If I could find a set I'd cut the shells off and make dually 17 or 18s. I found a place that'll make aluminum wheels in my bolt pattern for $3500 but they're 22s and that's not what I'm after.
Click to expand...
Just run them as is. Split rims are fine.
 
Southernfriedcj8 said:
If this is a nice as it looks it's and easy 20-25k sale on BAT.

If it was local I'd look at it for a flip.

$11.5k in GA.

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com www.facebook.com

1692189489115.png
Click to expand...
I thought you were in Atlanta? How much closer does it need to get?
 
It's on the OTHER
Bacho said:
I thought you were in Atlanta? How much closer does it need to get?
Click to expand...

I'm near Athens.

It's on the OTHER SIDE of Atlanta. I don't mind a 2 hour drive, one way, but not through Atlanta.

If it was south, east or northeast, I'd be on the way. I ain't driving through Atlanta to make a measley 10k.

It fully brought the suck going through Atlanta and 75 north of Atlanta 2 weeks ago to get to Omaha on an impulse buy.
 
Southernfriedcj8 said:
It's on the OTHER


I'm near Athens.

It's on the OTHER SIDE of Atlanta. I don't mind a 2 hour drive, one way, but not through Atlanta.

If it was south, east or northeast, I'd be on the way. I ain't driving through Atlanta to make a measley 10k.

It fully brought the suck going through Atlanta and 75 north of Atlanta 2 weeks ago to get to Omaha on an impulse buy.
Click to expand...

Now you sound like my grandparents. :flipoff2:
 
Saw a yellow one of those things on a rollback two hours ago
Hopefully that piece of a shit was on the way to the scrapyard
 
You must log in or register to reply here.
Top Back Refresh