Should be fine, especially if it's in aluminum...My terminology is probably off. I'm in aviation and looking to make "lightning holes" in some frame boxing.
11 gage is their max and that's what I need to punch out for my boxing plates.
So you want to use it like dimple dies?My terminology is probably off. I'm in aviation and looking to make "lightning holes" in some frame boxing.
11 gage is their max and that's what I need to punch out for my boxing plates.
I have all of the above as well, including the swag standard size tube knockouts to match the dies. Works pretty good. I've had a few issues with one particular size of the SWAG dies having incorrect clearances and the slug always gets stuck. I've even tried harder coated shanks and it still bites and requires some work to get the slug out.I have it and the swag dimple dies that fit those sizes. It's pretty awesome.
Swag also sells even number(1", 1.5", ect) knock outs if you already have the dimple dies.
Even with greenlee punches when they get dull you break and bend studs and that’s a pain.The dies will probably not be as good as a Greenlee, but it should be ok for basic use.
It's probably a 10k psi pump, so it should also be able to use their portapower accessories.
Aaron Z