Something I should have looked into years ago but never cross my mind till the other day. I had to use about 10-15 cut off wheels to make a ballast box for my tractor since I dont have a plasma cutter. Not a smell I enjoy nor did I want to open the garage door to get a cross breeze, dam cold outside and windy. Also had no desire to build my own for some reason. Amazon has a few smaller units for 250-500 with the large jet unit cost $800 before shipping.
RV bay = 7,056 cu ft
2 Car = 12,000 cu ft
Roughly = 17,000 cu ft
Calculations online recommend sizes the system to turn over the air in the garage about 6 times per hour. The garage would require multiple units to turn over the air 6 times if I purchased the smaller units for 300-500 each. But I was able to find a large unit in town on ebay. The seller accepted $500 with extra filters. Guess he would have taken 300 since he only sells computer stuff.
Dam thing was brand new with the remote inside the box. Tractor to rescue
I should check to see the additional cost of the bag filters
Cluster fuck since the tractor doesnt reach high enough. I should have raise the unit up on the pallet with boxes or something to get more height.
Had to get a little creative to lift the front end up.
Almost finished done with install
RV bay = 7,056 cu ft
2 Car = 12,000 cu ft
Roughly = 17,000 cu ft
Calculations online recommend sizes the system to turn over the air in the garage about 6 times per hour. The garage would require multiple units to turn over the air 6 times if I purchased the smaller units for 300-500 each. But I was able to find a large unit in town on ebay. The seller accepted $500 with extra filters. Guess he would have taken 300 since he only sells computer stuff.
Dam thing was brand new with the remote inside the box. Tractor to rescue
I should check to see the additional cost of the bag filters
Cluster fuck since the tractor doesnt reach high enough. I should have raise the unit up on the pallet with boxes or something to get more height.
Had to get a little creative to lift the front end up.
Almost finished done with install