What's new
By:
Filters

Buy or Build trailer?

Wired. Don't mind the colors.... I had left over wire from another project.
1000029642.jpg

1000029643.jpg
 
I think I may need to swap on this different springs. That's 1100 lb , and the u-bolts are hitting the crossmember on bumps
1000029677.jpg
 
Add some bumps.

I had same issue on my car trailer. Bolted some poly bumps between frame and axle. Works great
 
More spring first. Don't want to ride on the bumps all the time, that's how you bend axles and frames.
 
I have a 6.5 x 10 solid side H&H trailer with a 3500lb axle. I put 5200lb springs on it. Best upgrade I’ve made. It handles significantly better with a load.
 
I have the stiffer springs. Just need to swap them on. It will have to suffer a couple hundred miles this weekend. No time to do it now.
 
Muckin_Slusher said:
Just admiring your chain setup
(while zooming in to check if truck registration was current.) :flipoff2:

1000029675.jpg
Click to expand...
Hahaha yeah. Chains were short. Had to run to a meeting, figured one was better than nothing. It's fixed now. :flipoff2: I was done ring how long it would take someone to see that. And yes my reg is good :flipoff2:
 
Last edited:
Made it a couple hundred miles. Tows nice! Glad I did the markers on the front corner of the fenders. Nice and easy to see. It's almost exactly the same width as the mirrors on my Tundra. Ball-axle is a little long, I have to swing a little wide on turns. But overall good enough!

Need to swap to the stiffer springs and add the brakes....

1000029682.jpg
 
You must log in or register to reply here.
Top Back Refresh