Landslide
Red Skull Member
- Joined
- May 20, 2020
- Member Number
- 422
- Messages
- 1,478
So, I have this heavy ass Lyon (think vidmar) drawer cabinet I bought to put my machinist tools in and put it between my mill and lathe. Like I said it’s very heavy and I need to be able to move it. I need to keep the caster wheel base low profile as I was it easy to see into the top drawer. It’s 60” tall and I’m 6’2” tall but I don’t want it much taller
So I used steel I have in stock to build the frame with and after cutting everything up I needed, I only had two 1/8” thick tubing off all left. Pretty crazy on that part.
I made the caster wheel bolt plates years ago when I operated a waterjet table.
So I used steel I have in stock to build the frame with and after cutting everything up I needed, I only had two 1/8” thick tubing off all left. Pretty crazy on that part.
I made the caster wheel bolt plates years ago when I operated a waterjet table.