suzuki

Clearly I have too many projects. All are located in Winchester, VA. I’ve been off work for a month and need to generate some cash. Make offers if interested. White tin top Suzuki Samurai. No ***le, I’ve been in contact with the last registered owner. He’s not motivated to go get a reprinted...

I know this samurai is on the west coast as it’s in the king of Elbe videos. I’m looking for a build thread or build info on it. Mostly the tube bed design as I plan on building something similar to it. I think they did an awesome job on this rig. These are screen shots of it for reference

Modifying the sj413 mini spool to the sj410 if anyone interested the spline count the same so that not an issue just doest fit into the housing, I've added the dimensions I've used to get it fit, the od needs some attention and the overall length needs some mods too

Last Spring I acquired my first Samurai after trading some work on a buddies buggy. I know nothing about these things, but have always liked the size and simplicity. Supposedly, its an '88 and I got it with a blown head gasket. It came with everything I needed to put it back together, but...

good running 1.6 engines are getting expensive and many have the same issue. I would like to rebuild mine after I found a damaged piston. There are some things on the internet about the blocks cracking but most of it is conflicting about whether or not the block is worth spending a little...

I used my sami close to home and only over the last 3/4 years have gone out East 3 times and SMORR x 2. Either way, last year with some of the guys here I was able to see some really nice set ups and what they can do. I mostly get stopped on uphill obstacles or have to bounce a little to keep...

Hello! I figured I should copy my build thread over here for ****s and giggles... This all started March of this year, so I will get you caught up quick. My vehicle ADD has slowed down a lot, but it obviously isn't gone! I went out and bought a 1987 Suzuki Samurai... The hard stuff is done...

EDIT: I wont be in Thailand until November Just a place holder for info I come across. Especially coil sprung from the 3-4th gen. The SJ410's are very popular in Thailand although they didn't coils until 2022 so late in the 4th gen. They come in autos and sticks, diesel and gas/propane at the...

this is Jerry. Jerry lived its life up till recent time bone stock here is this picture it has an upgraded rear bumper. The only upgrade under the hood to this point is new exhaust due to the factory stuff falling off.

Jeep guys have done this quite a bit with early CJs. Saw someone do it recently and made me think, why not a Sami? My thought is to stretch it in the middle of the fender 3-5" and then make a piece that moves the hood hinges out the same amount. Move the rad, steering box and axle forward...

Nobody may be interested in these, but I wanted to share them just in case. These plugs are 3d printable and will fill the small square hole left in the flare when you remove the rocker trim. I printed these TPU. The file includes a solid version and one with the logo. Resource

What is the standard brake setup for Toyota axles on a samurai in 2024? 33-35" tires, will be street driven. I ordered fj60 rotors and want to keep the Toyota drums out back. I'm trying to decide if I should order 4cyl or v6 calipers? Do I need a different master cylinder? Is everyone still...

With a change of plans I started looking into the specs of the 1.3l, 1.6l 8V, and the 1.6l 16V. Each engine increases in HP and torque, but I have also heard the 8V has more bottom end torque than the 16V, and everyone knows how hard a 1.3l can be beat on before dying. However, I had to pull a...

Hey all, recently picked up a '03 XL-7 and looking to build a Overlanding style rig out of it, but on a budget. Looking to do a 3" suspension lift and 2" body lift. I have the coil spacers and body lift already, so what coils could I run that would give me around 1" of lift? Also, what longer...

Suzuki Samurai with 22r Toyota motor, Toyota 5 speed transmission, and Toyota doubler transfer case. Toyota axles front and rear. Air shocks all corners, new prp 5 point harnesses, corbeau seats, comes with 2 tanks, 36" iroks on beadlocks, 4:10 gears, rock lights, 4 link front and rear. Great...

Anyone running the roadless gear Pentadapters? I gave my cousin a first gen Toyota double cardan front driveshaft for the rear of his samurai. Sent him the link to the roadless gear parts. He’s telling me it won’t work and the register on the pentadapter is .039” too large to fit the samurai...

Man, do I hate chasing electrical problems. 1994 Tracker (1.6L m/t) has been having intermittent no-start issues, and I've been push-starting it when I need to use it (which is not very much). It will start, then it won't. I changed out the starter, new battery, checked alternator (ok), and...

Seems like an easy bit of info to find but my sorry a#s can't find it. So maybe someone here can help me please. I have a 1995 geo tracker. Does anyone know the wall thickness of the rear axle housing tubes? Thanks in advance!

This build has been a long time coming. I first had this rig in my possession back in 2007 when a friend of mine bought it sight unseen from seabass44 (12 volt guy) off of pbb. He wasn’t able to pick it up so another buddy and I drove up to Oriville to get it and hold it for him until he could...