long

how do you store wire for long term. I seem to swap wires for different tasks and when I go back to them they are usually rusty. Lots of humidity here so the temp cycles exacerbate things. I tries a zip lock bag but it wasn't enough protection or there was too much humidity in bag when...

2012 3.5L EB. A couple of days ago it seemed slow to start, but only enough that only I would notice. In the last few days it has gotten noticeably worse, almost like the battery was dying. I pulled the meter out and it had 12.89V with the key off and 14.4 with the engine running. Hmm, seems...

Yeah, I know LC engineering is the best you can buy but I'm cheap. Does anyone have experience with a reman long block from auto zone or oreillys? Lots of mixed reviews on their sites.

Thinking at first going as short as possible while keeping leaf springs. What do yall think? Is there a "perfect" wheelbase?

This SM 465 uses a custom shaft that let's me use a CUCV M1031 NP 205 transfer case of which I have a few spares, that basically means I can use the same transfer case on a T400 or the modified SM 465...

Question for the builders. How would you run the brake lines for the front axle? I think we want this rig to stay DOT legal so no JIC or AN stuff right? So come all the way back to the bottom link crossmember then run lines down the top of the links with zip tie tabs OR just run off the...

'72 Ford F250 single cab long bed needs rocker protection. Frame has a lot of flex and the sliders need to be 8' long. Frame is narrow, 34" so supports are long. Do I need to do anything special? Lessons learned? Current plan is to use 2x4 3/16 for the rail, and four 2x2 1/8" supports tied to...

1999 4runner (5Vz-FE) 235.000 miles My kid just put a Magnusson supercharger and Doug Thorley headers on the above truck. Next week it gets a new exhaust (Black Widow I think). If he drives it semi normal, and not like a dragster, can anybody give an estimate as to how long the motor will last...

Without throwing up. :barf: McDonald's will last in infamy as the only place that upon the first time i ate there, i threw up right out the window of the back seat of the car after getting drive thru at approx 14yo. But to the point of the spinoff, it's been since 1992 since i've vomited...

Trying to sell or trade for a short box Otherwise I'm cutting up this long box into a short box.. "rust free" in Boise Idaho. Does have surface rust only on bed pan. No cancerous rust anywhere.

I removed these u-joints right when Bobby started selling D60 birfs, ran them a season previous to removal. Just the caps, no cross's, no zerks seals or anything. Id prefer these go to someone who is running Bobbys u-joints and not to someones parts shelf. You cover shipping and they are yours.

I’ve been debating posting this, because I have a feeling the backlash will come. :flipoff2: 2009 Chevy Silverado 1500 just did 30+ hours of towing and I’m pretty sure the AFM/DOD lifter failure happened 10 minutes from home. There’s a huge exhaust leak at the manifold, so it’s hard to tell if...

What I have to offer you here is a partial length of 2/0 copper gazillian strand battery cables. Salvaged from a bunch of german VW cars. They are available in a few different conditions with nothing with a few looms with just shrink. 2nd pic shows with the looms and smaller branch wires...

3rd Gen 4Runner/1st Gen Tacoma +3.5" Long Travel with plate construction (may require modification)