atlas

https://www.advanceadapters.com/4476 New - toke them off new atlas to put on flanges $80 Shipped

After a few years wheeling a leaf sprung Toyota I decided it was time to build a buggy. I initially purchased a chassis custom ordered but wasn't happy with what I got ( long story) and sold the chassis. Now Camprock fab is building me the chassis I really wanted. Built to me and my parts. Ive...

I know people will say "sell it and buy a new one" but this thing is 20 years old and already in pieces. Looking at it, 3 of the bores are the same and would just need some new holes drilled. The back side of the front output shaft would need bored to 4.50" and the new location would need a...

I found an atlas T-case that is for a divorced setup. Is it a big deal to convert it to bolt to a tranny? (No room for divorced) This one says pax drop. Can’t they go either way?

Atlas II 5.0 transfer case New, only used for mockup. Changing our minds and not upgrading the FJ40. Skip the long wait and buy this one. Passenger Drop 32 spline outputs Speedo housing manual levers clocking ring rear output flat flange front output yoke (unsure?) T-400 adapter (I think?)...

Looking for a 4.3 and 23 spline before I waste money on a D300.

I am about to do my final fit and install of my Atlas 4 speed and noticed that a bolt is missing on the planetary shifter housing. I can see that there was likely one there since there is a blue sealant witness mark. I can’t find a diagram or rebuild info for the planetary box, so can’t tell if...

Ever wanted to try a lower low range in your Atlas? I’ve got a very low use set of 5.0 gears in a box I can ship, looking for $600 out of them. In the box with the gears I have a Jeep 23 spline input and a Ford 31 spline input. I replaced them with a different gear ratio is the only reason I...

Anyone deal with the manufacturer Odin? I made an order with them for 3 of their Atlas muzzle brakes, 2 for myself and I for my son for Christmas and never received a confirmation email on my order. Their reviews are great for their products and I really like the tunability of the brake but I...

Older 3.8 atlas, needs a rebuild, has worn thrust bearings and some roller bearing play. Includes full new in box rebuild kit. Currently has 32 spline gm input but will include 23 spline as well. Has 1 1350 yoke and I have 2 new toyota flanges as well. (I may keep these if they will work with...

Credit to Randall E. from GrabCAD

Got a used atlas and am swapping the input and yoke out. Was going to hang onto it just incase, but it'll probably get lost before I swap transmissions :laughing: 32sp input with the old style 6 splines on the internal side pre 2006 I believe? $100 shipped 32 sp yoke, only have 1 $40 shipped...

We have available 10 Atlas 2 spd Cases as well as 2 JL cases. The 2 Spd cases are either 3.8 or 4.3 Ratio with 1350 Yokes All cases are driver side drop. We can set you up with Adapters and Shifters just DM us No wait time, we can ship them Starting next week Check out our mounting options...

Building a Rock bouncer INSPIRED rig....using 6.0LS, TH400, 14 Bolt, Super Duty D60....Looking for TRANSFER CASE RATIO RECOMMENDATIONS.... Going to use an Atlas, but trying g to decide on ratios....leaning towards the 4SPEED. We live in Nebraska and will travel to Colorado, South Dakota...

From an early style case, with coarse splined gears. 100 shipped Sold!

Picked up a used atlas 3.8 that needs shifters, would like to hear your thoughts on either. Paired to an AX15.