this thread has to be revived
-
Last edited by gunracer1; 05-21-2020, 09:07 AM. -
Cannuck style
the fronts would bounce off the ground...83, 22re,w56,ultimate duals,4:10 \31" arbs.
hopes to grow up someday -
Thats about 20K on a half ton , SEND IT !Comment
-
Not much tongue weight there... Oughta be interesting when the trailer starts wagging with that load!Originally posted by gunracer1 View Postthis thread has to be revivedComment
-
From last winterComment
-
Came across this one of facespace a while back and forgot to post it in the old thread
Comment
-
Genius!Originally posted by 95stepside View Post
Came across this one of facespace a while back and forgot to post it in the old thread
Comment
-
Not terribly heavy, kinda dumb but had 26' beams on my 18' trailer this morning, negative or neutral tongue weight, all back roads nice and slow, flagged the tail
it was a 65ish foot long double wide, it'll make a nice car port somedayComment
-
100lbs of air in the bags. Was way heavier than expected. Had to cut the big one to unload with a 580 case backhoe. Barely picked the smaller one without being cut. Loaded with a JD 644 loader and the big one made it dance. Have no idea the total weight. Didn't look like much but that oak had some weight to it.
Comment
-
Huge lathe, even with dual tandem trailer it was way over GCVWR. Didn’t overload any of the tires though.
Last edited by Blown4x4; 05-28-2020, 04:44 AM.Comment
-
Hauled this boring mill out of the high desert of Eastern Oregon. Owner stated it weighed 30,000ish lbs. we took the table and tail stock off to haul it. The dual axle single tire trailer is rated a 25k. Needless to say the trailer was WAAAY over for the tires. Was epic shit show of blow tires and chaos.
The boring mill assembled weighs close to 50k.
*Edit. This was the shitty boat trailer the mill was sitting on when we purchased it. And no way to cross load it on a real low boy trailer.Last edited by Blown4x4; 05-28-2020, 04:43 AM.Comment
-
Yes, that is 30 5/8" sheets of 12' drywall in the back of that Nissan...
TDO Dysfunctional Rockcrawlers. URF Racing. TIN BENDERS.
JV rally post #31.Comment
-
Not sure if full on Stupid or just on the edge of Dumb. I'll hear if about it either way
. Was a slow, heavy drive to town.
Last edited by IUsedtoBendCars; 05-28-2020, 09:31 PM.Comment
-
People are really this dumb? Wow. I love this thread alreadyOriginally posted by Jes View PostYes, that is 30 5/8" sheets of 12' drywall in the back of that Nissan...
Comment
-
KrustyTJ
Comment