What's new

We need a garage sale for Zuks and Geos like the Toyota section.

Covecrawler

Well-known member
Joined
Jul 21, 2020
Member Number
2340
Messages
87
1.6L 16V core with harness and ECU, harness was cut at the firewall. $250

samurai axle set with SPOA perches and Zlink $300

5.12 tracker front diff $150

2000 Tracker, 91K miles 2.0l 5 speed $1000

Samurai Lockright without side couplers $150

Sidekick/tracker power steering box, pump and pump bracket $150

Stock front shafts with birfield rings $100

Chevy dana 60 housing with 63.5" WMS 27" spring width, needs the DRW hubs machined, and long side inner shaft. This should bolt right into factory samurai springs. $600

In over my head on a home renovation, need to liquidate my years of Suzuki parts collection. Everything is in Winchester, VA
 

FleshEater

Ordinary Average Guy
Joined
May 21, 2020
Member Number
832
Messages
1,911
Loc
Shithole in the Rust Belt
1.6L 16V core with harness and ECU, harness was cut at the firewall. $250

samurai axle set with SPOA perches and Zlink $300

5.12 tracker front diff $150

2000 Tracker, 91K miles 2.0l 5 speed $1000

Samurai Lockright without side couplers $150

Sidekick/tracker power steering box, pump and pump bracket $150

Stock front shafts with birfield rings $100

Chevy dana 60 housing with 63.5" WMS 27" spring width, needs the DRW hubs machined, and long side inner shaft. This should bolt right into factory samurai springs. $600

In over my head on a home renovation, need to liquidate my years of Suzuki parts collection. Everything is in Winchester, VA
PM sent about the p/s stuff!
 

JR4X

wheeler
Joined
May 20, 2020
Member Number
445
Messages
1,404
Loc
Mancos Co
Anyone have a power steering reservoir?
I do
image.jpg
 

flexy flatty

Red Skull Member
CAL4
Joined
May 25, 2020
Member Number
1396
Messages
61
Loc
Atascadero, CA
1.6L 16V core with harness and ECU, harness was cut at the firewall. $250

samurai axle set with SPOA perches and Zlink $300

5.12 tracker front diff $150

2000 Tracker, 91K miles 2.0l 5 speed $1000

Samurai Lockright without side couplers $150

Sidekick/tracker power steering box, pump and pump bracket $150

Stock front shafts with birfield rings $100

Chevy dana 60 housing with 63.5" WMS 27" spring width, needs the DRW hubs machined, and long side inner shaft. This should bolt right into factory samurai springs. $600

In over my head on a home renovation, need to liquidate my years of Suzuki parts collection. Everything is in Winchester, VA
I wish your axles were on the west coast, I need a set for my lj10
 
Top