What's new
  • Check out our new Group Buy Program! We're kicking it off with Baja Designs! $10 Flat rate shipping no matter how much you order!

Warn winch solenoid help.

Trashman

Trainwreck
Joined
Oct 13, 2021
Member Number
4472
Messages
385
Bought a FB marketplace Warn winch, 6klb. I thought it was an M8000 due to no info/low quality pics but turned out to be a 6k. Meh, price was still darn good so bought to keep or flip.

Wired up, and no bueno.

If I jump the two big lugs on the first solenoid (lower left)it works as usual though. Ran out of time to diagnose any further.

Whats a good source to go through a checklist to find the issue?

I learn better by doing. rather than reading, so either a very detailed checklist or a good video?

Pic is from Google. Seems like a similar setup on mine.

I jumped the lower left solenoid large lugs with a pair of needle nose pliers.

wYbjfIYhtSQsw8QglfU28l9GBCuBIOAh6RjYyO6Djkk.jpg
 
Break them all down and clean all cable and lug bar ends.

While its all aprt you can individualy test each sol.

You can also test the switch.
 
Top Back Refresh