Edit: engine, trans and t-case are sold. Axles still for sale, $2500
Iron block 6.0 LQ4 with harness and ECU. Brand new water pump and F body oil pan/pickup tube with Felpro gasket. Complete except EGR.
4l80e trans that came out of the truck with the engine, but was originally in a van and replaced the truck's original trans.
Ford driver drop np205 transfer case. Rebuilt, changed to 32 spline input to match the 4l80e. Shift rails modified for front digs. Clocking ring added (after pic shown) to slit flat with trans pan. Forged 1410 u bolt yoke rear, standard 1410 u bolt yoke front
Advanced Adapters GM 2wd 4l80e to Ford NP205 32 spline Adapter, modified to fit shift rail with clocking ring.
2005 Superduty F250 front Dana 60 hi pinion. Complete except brakes. ~80% of the bracketry removed.
Diamond 9" rear housing, cut to length for your desired width. Fits 9, 9.5 and 10" 3rd members. 3.5" x .375 DOM. Large inspection/fill port (not yet installed). Custom machined bearing cups with brand new 05+ Superduty unit bearings to match the fronts, 8 x 170mm bolt pattern.
At this time, I won't be able to ship, but i have a cherry picker to help load. Located in Camarillo, CA
Iron block 6.0 LQ4 with harness and ECU. Brand new water pump and F body oil pan/pickup tube with Felpro gasket. Complete except EGR.
4l80e trans that came out of the truck with the engine, but was originally in a van and replaced the truck's original trans.
Ford driver drop np205 transfer case. Rebuilt, changed to 32 spline input to match the 4l80e. Shift rails modified for front digs. Clocking ring added (after pic shown) to slit flat with trans pan. Forged 1410 u bolt yoke rear, standard 1410 u bolt yoke front
Advanced Adapters GM 2wd 4l80e to Ford NP205 32 spline Adapter, modified to fit shift rail with clocking ring.
2005 Superduty F250 front Dana 60 hi pinion. Complete except brakes. ~80% of the bracketry removed.
Diamond 9" rear housing, cut to length for your desired width. Fits 9, 9.5 and 10" 3rd members. 3.5" x .375 DOM. Large inspection/fill port (not yet installed). Custom machined bearing cups with brand new 05+ Superduty unit bearings to match the fronts, 8 x 170mm bolt pattern.
At this time, I won't be able to ship, but i have a cherry picker to help load. Located in Camarillo, CA
Last edited: