What's new

CA Tons of misc suzuki parts

Status
Not open for further replies.

YotaAtieToo

Thick skull
Joined
May 19, 2020
Member Number
142
Messages
11,176
Loc
Bonners Ferry, ID
Magalia, ca

I have 2 2nd gen (99 and 00 iirc) 4 door track kick shells, some 1st gen track kick parts and some Sami parts.

1 - 99 5 spd bad reverse $50
1 - 99 tcase works fine $50 (this is the later coarse spline rear out put)
1 - 91 t case works fine $50
1 - 91 front diff case no r&p or carrier $20
1 - 99 front diff case no r&p $20
1 - 00 front diff case no r&p $20
​​​​1 l&r - 00 cv shafts $25
Both 99 drive shafts $25
Both 91 drive shafts (robbed 1 u joint) $20
99 manual window doors, beat up, rusty and spray painted $25 for all
00 power window doors, good shape, dark blue $50



All suspension parts available. 99 has the "upgrade struts from a 80s Monte Carlo, longer rear shocks and 2" coil spacers? $50 for all
​​​​​​
00 is all stock, you can use these a arms and CV's on a 1st gen track kick to move your tire out and forward.



I also have this kit

https://www.zukparts.com/Suzuki-Vita...Conversion-Kit

Plus the Toyota manual hubs, a pair of drive flanges and 2 or maybe more toyota CV's (most likely with torn boots)

I have 1 1st gen spindle with the bushing pressed in, as well as 2 2nd gen spindles with custom bushings that haven't been pressed in.

I'd sell it all for $250
​​​​​
86-95 toyota ifs non add diff that I installed in the 99, it's 4.56 and has a spartan locker. $200


My buddy also has the 91 2 door roller, plus some other misc 1st gen parts.



Thanks
Jeff
530 592 6033
 
Last edited:
Click image for larger version  Name:	IMG_20200613_122511_01.jpg Views:	0 Size:	605.5 KB ID:	38959
Click image for larger version  Name:	IMG_20200613_101459_01.jpg Views:	0 Size:	623.0 KB ID:	38960
 
Last edited:
Status
Not open for further replies.
Top Back Refresh