Magalia, ca
I have 2 2nd gen (99 and 00 iirc) 4 door track kick shells, some 1st gen track kick parts and some Sami parts.
1 - 99 5 spd bad reverse $50
1 - 99 tcase works fine $50 (this is the later coarse spline rear out put)
1 - 91 t case works fine $50
1 - 91 front diff case no r&p or carrier $20
1 - 99 front diff case no r&p $20
1 - 00 front diff case no r&p $20
1 l&r - 00 cv shafts $25
Both 99 drive shafts $25
Both 91 drive shafts (robbed 1 u joint) $20
99 manual window doors, beat up, rusty and spray painted $25 for all
00 power window doors, good shape, dark blue $50
All suspension parts available. 99 has the "upgrade struts from a 80s Monte Carlo, longer rear shocks and 2" coil spacers? $50 for all
00 is all stock, you can use these a arms and CV's on a 1st gen track kick to move your tire out and forward.
I also have this kit
https://www.zukparts.com/Suzuki-Vita...Conversion-Kit
Plus the Toyota manual hubs, a pair of drive flanges and 2 or maybe more toyota CV's (most likely with torn boots)
I have 1 1st gen spindle with the bushing pressed in, as well as 2 2nd gen spindles with custom bushings that haven't been pressed in.
I'd sell it all for $250
86-95 toyota ifs non add diff that I installed in the 99, it's 4.56 and has a spartan locker. $200
My buddy also has the 91 2 door roller, plus some other misc 1st gen parts.
Thanks
Jeff
530 592 6033
I have 2 2nd gen (99 and 00 iirc) 4 door track kick shells, some 1st gen track kick parts and some Sami parts.
1 - 99 5 spd bad reverse $50
1 - 99 tcase works fine $50 (this is the later coarse spline rear out put)
1 - 91 t case works fine $50
1 - 91 front diff case no r&p or carrier $20
1 - 99 front diff case no r&p $20
1 - 00 front diff case no r&p $20
1 l&r - 00 cv shafts $25
Both 99 drive shafts $25
Both 91 drive shafts (robbed 1 u joint) $20
99 manual window doors, beat up, rusty and spray painted $25 for all
00 power window doors, good shape, dark blue $50
All suspension parts available. 99 has the "upgrade struts from a 80s Monte Carlo, longer rear shocks and 2" coil spacers? $50 for all
00 is all stock, you can use these a arms and CV's on a 1st gen track kick to move your tire out and forward.
I also have this kit
https://www.zukparts.com/Suzuki-Vita...Conversion-Kit
Plus the Toyota manual hubs, a pair of drive flanges and 2 or maybe more toyota CV's (most likely with torn boots)
I have 1 1st gen spindle with the bushing pressed in, as well as 2 2nd gen spindles with custom bushings that haven't been pressed in.
I'd sell it all for $250
86-95 toyota ifs non add diff that I installed in the 99, it's 4.56 and has a spartan locker. $200
My buddy also has the 91 2 door roller, plus some other misc 1st gen parts.
Thanks
Jeff
530 592 6033
Last edited:
