Thread size?

[jangel]

Anybody know what size threads are on a 1994 4 runner fuel filter that's mounted to the frame? Internet said 14mm x 1.5 and that is way too small. Seems closer to a 11/16" but pretty sure it's metric. Need to by a fitting that goes from it to -8 AN.

 

[Oddball]

Should be 14x1.5. Unless it had a banjo, but it shouldnt. Go to the parts store and ask for a new filter. Then look at it before purchasing. See if it's the same as what you have. Buy a thread gauge while you're there.

 

[J.Cole]

X2 on it being M14x1.5. I used these on my 3.0, but they are -6 not -8.

M14 Inverted Flare to 6AN Male Fittings

These machined 6061 aluminum adapter fittings will convert the OEM hard line flare fitting to a -6AN male connection for many Japanese vehicles.The surface finish is type-II anodized to resist all fuel types including methanol, ethanol, and E85. Note: Not all M14 x 1.5mm inverted flare to -6AN...

www.tunedbyshawn.com