Show us your GM

[slowlygettingthere]

Wife's "new" dd.

 

[Scrappydoo]

Here is my daily. 2001 2500HD. 8.1, Allison. 1978 Ford Dana 60 front, off road design brackets, WFO frame plates, ORD steering. Stock 47” springs brought it to roughly 3 1/2” taller than stock.

 

[86k10Crawler]

86 K10 with some modifications

 

[Truckedup]

mostly original ,250 4 speed, now 292

 

[Aggie06]

mostly original ,250 4 speed, now 292

More pics.

 

[ridenby]

mostly original ,250 4 speed, now 292

Very nice.Want to sell?

 

[Gunz101]

new project. Arizona truck. Couldnt find a 4x4 that wasnt rusted out or $40k so I am going to start this project soon. Looking for a donor 4x4 chassis. Long term is a 4x4 shortbed with 350 and either 4500 or 4l80E. Still planning stages.

 

[Showtime3492]

My under construction blazer 05 sd60 14 bolt,black box, 205, sm465, coilovers etc

 

[jawzjeep]

91 with 3/4 ton axles. Just got a front 60 for it and have a 454, nv4500 or Th400 to go in it at some point.

 

[What?]

2003 2500HD 8.1

 

[TDash]

2006 Silverado 1500 Crew Cab
d60 and shaved 14 bolt
5.13 gears
ARB front and rear lockers
PSC hydro assist steering
custom 4-link for front and rear
14" ORI STX on all 4 corners
40" pro comp MT2s (hard to get tires right now so these are temporary)
17" Raceline RT231 Monster Beadlocks
move front and rear bumpers with warn zeon 12s platinum up front
rock sliders
line-x paint on the whole truck
fuel cell in the bed with a little show bar to house the filler
stock everything 5.3L, tcase and transmission with a K&N Cold Air Intake

 

[RSWORDS]

The 83 "family" wheeler

 

[TDash]

DMANbluesfreak from other forum, i'm gonna delete the other forums post


i'm happy to take any new pics and post, I'll see what shots I can get for the rear ORIs.

Full disclosure: I worked with a local shop who did all the fabrication and work, i lack all the skills (and time) but i knew what i wanted

P.S. I have been lurking and following your build for years and drew some heavy inspiration from your build with some tweaks

 

[pennsylvaniaboy]

Here is my daily. 2001 2500HD. 8.1, Allison. 1978 Ford Dana 60 front, off road design brackets, WFO frame plates, ORD steering. Stock 47” springs brought it to roughly 3 1/2” taller than stock.

you cant hardly tell that is much more than a torsion bar crank if you dont look close.

 

[pennsylvaniaboy]

Here is mine. What’s left of a 1979 k30. 5.7 vortec, SM465/205/205 with tons. Radius arm coil front, and coil 4 link rear. And mostly tube. 40” nitto trail grapplers, dirty life beadlocks.

 

[Brecklin]

Fresh pic, just about done giving her some TLC. Rockers, floor pans, cab corners, fenders, doors, and wheel arches. Sprayed it in Raptor Liner.

My first time doing body work, and with a "good enough" mentality, it turned out decent. Way better than it was before.

 

[jhama78]

Before during and after. My '06 3500 4wd, 8.1 Allison daily/tow rig I've been working on. auction buy with 98k on the ticker. Bud of mine is fixing the rockers right now for me

 

[jhama78]

Here is my daily. 2001 2500HD. 8.1, Allison. 1978 Ford Dana 60 front, off road design brackets, WFO frame plates, ORD steering. Stock 47” springs brought it to roughly 3 1/2” taller than stock.

Gonna need some more info and pics of this rig. Would love to do that to my '06.

 

[Scrappydoo]

Gonna need some more info and pics of this rig. Would love to do that to my '06.

I will grab some pics once the snow and slush falls off.

This truck is my workhorse. Really only moves if it’s pulling a trailer or pushing snow. I got sick of rebuilding the IFS every season so I swapped it. Figured do it once in the only way I knew how. Leaf springs and a 78-79 Ford 60.

With the ORD kit and stock height, 3 leaf spring packs, it wound up at exactly 3” of lift. That was important to me because I planned on it wearing a blade again once it was done. Unfortunately, leaf springs made that allot harder. No where to mount to.

Can’t stand dash lights, so I had the hubs machines and used the WFO ABS rings and sensor mounts. I made a mount for the 4x4 actuator on a crossmember so I won’t get any service lights.

I slammed a conversion joint in the stock front driveline and ran with it. Not ideal by any stretch, but this thing really won’t ever get twisted up in the rocks. I will run it until it’s a issue and then do a fixed output swap on the transfer case and have a new driveline built.

I used stock replacement rear shocks up front with f series shock towers, and some tabs burned on to the tubes out of some 1/4” plate I had laying around.

Whole ordeal took two long weekends from jacking it up with IFS, and setting it back down with kingpins.

 

[OutlawRider]

89 K5 boatside w/60 & 14 bolt

01 Chevy 8.1/Allison wrecked but runs. Bought as a donor but may wheel it.

22 AT4 w/6.2

03 GMC Sierra w/01 LB7

Not pictured is an 04 Sierra wrecked as a donor for a 67 c10 short bed

 

[Hooligan]

03 GMC Sierra w/01 LB7

Not pictured is an 04 Sierra wrecked as a donor for a 67 c10 short bed

This looks cool, nice clean

 

[OutlawRider]

This looks cool, nice clean

I drive it everyday. The new one sits at home.

 

[Noahrob]

Just starting...swapped in tons and new suspension, now it drives...

Building a 6.0 and got hydro assist ready to weld up

 

[nvrenuf]

I've posted it before but I got some new tires & wheels and haven't been anywhere except down the street so I'm pic whoring in a grocery store parking lot.

39 Boggers and Trailreadys

 

[lagunaMS]

Two 97’s, half ton Chevy and 3/4 ton GMC

 

[Hopper]

91 sub 2500
TBI 454/4l80/241
60/14 w/ detroits, chromos
37's and pitted chrome 20's

 

[backchat]

bumper details?

 

[Hopper]

bumper details?

Its a buckstop bumper

Classic 1

Check out the deal on Classic 1 at Buckstop Truckware

www.buckstopinc.com

 

[backchat]

Looks great, but damn that's steep!

Its a buckstop bumper

Classic 1

Check out the deal on Classic 1 at Buckstop Truckware

www.buckstopinc.com

 

[Hopper]

Looks great, but damn that's steep!

LOL. I Agree. I bought it used off Craigslist. The grey one in the photos was on another suburban. The guys kid rolled it one night and he parted it out. I reaped the benefits.