shot out Remington 700 barrel

[Texas97]

im looking for one, dont care caliber or condition, just needs to thread into a Remington SA action. for a project.

ill pay shipping and/or trade a never used Millet red dot scope

 

[300sniper]

I've gotcha covered.

 

[Chevy_man]

I'm slowly building a stack of tomato stakes in the corner...

Funny how they're garbage but I just can't toss them in the scrap pile since I might need part of it.

 

[[486]]

hate to ask because I really don't gotta go spending more money
but any shot out 22-250 or 243 barrels?
just good enough for fucking around with a cetme parts kit, they don't gotta shoot good by any measure

 

[Steve300xcw]

Gimme one more summer and I will

 

[[486]]

Gimme one more summer and I will

but you're mister short barrels
I want me some long retardation

 

[Steve300xcw]

That one hasnt been cut yet. Gotta 26"ish 300rum thats gotta be getting close too

 

[[486]]

well then
it'd probably be a next winter project anyways, what with the ground starting to thaw again, concrete time is approaching

 

[Chevy_man]

I've got a 26" 243AI I pulled.

It started having massive velocity swings and has plenty of fire-cracking.

Taper is 1.016 to .950" at 26". She's just barely not a truck axle


Could probably lop off the chamber and still have a 22" barrel, it's threaded 5/8-24 on the muzzle already for a can

Button rifled McGowan, so not sure how it would react if you re-profiled the contour. I generally buy cheap button rifled ones because I've found if they're thick cut vs button doesn't matter.

 

[[486]]

Could probably lop off the chamber

now why would I do that, other than to get a normal chamber so I can use dirt cheap loading dies
Gonna be a low effort blaster, probably hogged all the way down to .650ish for the front sight to fit, wanted to try out using a hard wax instead of a fluted chamber, like the 5.7s use

 

[Texas97]

I've gotcha covered.

this man stepped up. Thanks!!