Clb
another toyota from P.R.K
So the old bible listed 3 date ranges for length, width ect.
But not thickness.
Heres my issue/question.
After re arching my bastard packs, The rears are placing the (? 6" ? Iduuno off hand) Shackles @12:30 position ( not great for ride) I'm running the 48" first gen springs main/mil wraps...
I'm looking at adding 2-3" to the rear dimensions, to move the shackle angel closer to 7-8 ish pm.
So the late model 89-95 are 51" close nuff front to hole #'s To place the axle in the fenderwell...
Do they have a milwrap and how thick are they?
Anyone got something else?
Not looking at mods to the pickup points, need a boltin solution.
Thanx cb
But not thickness.
Heres my issue/question.
After re arching my bastard packs, The rears are placing the (? 6" ? Iduuno off hand) Shackles @12:30 position ( not great for ride) I'm running the 48" first gen springs main/mil wraps...
I'm looking at adding 2-3" to the rear dimensions, to move the shackle angel closer to 7-8 ish pm.
So the late model 89-95 are 51" close nuff front to hole #'s To place the axle in the fenderwell...
Do they have a milwrap and how thick are they?
Anyone got something else?
Not looking at mods to the pickup points, need a boltin solution.
Thanx cb