What's new

VA One tons and Toyota “one tons” FJ80 axles. Winchester, VA

Covecrawler

Well-known member
Joined
Jul 21, 2020
Member Number
2340
Messages
273
SRW Chevy dana 60, unknown ratio, no lockouts. $1000

Cut down Chevy dana 60. 63.5” WMS. Was setup for FJ spring width. 3.73gears. Has DRW hubs with flanges torched off. Will need to be machined or new hubs. Needs long side shaft made. $600

1995 Ford F-350 cab and half of a frame. Locked up 7.3l, ZF5, DRW 4.11 dana 60. I saved this to used as a 5 speed swap and f250 SAS. $1500

FZJ80 axles with additional parts to be installed.
-5.29 gears for HP front and 9.5” rear
-solid pinion spacers and minor install kits
-lunchbox lockers
-OG longfields
-superwinch hubs and drive flanges
-knuckle seal kit
The axles have ABS, full float rear axle, control arms are on the axles, but missing one front lower.
$3200

2004 14b FF 4.11 with disc brakes, SRW $300

2005 Chevy van SRW dana 60 4.11 SF $300

2005 Chevy dually van dana70, 73.5” WMS, unknown ratio. Missing calipers. $500

1979 Chevy K20 rolling chassis. Dana 44, 14b FF $500

7.17 used LP dana 60 gears $100

225SL29B dana 60 35 spline Detroit locker 4.10 down or use with thick gears. $700 shipped​

 

Attachments

  • 0A5DDD9E-636B-472C-AEBB-F357D7604C9C.jpeg
    0A5DDD9E-636B-472C-AEBB-F357D7604C9C.jpeg
    2.5 MB · Views: 183
  • 971E850F-1C33-4ED7-B521-47BC18C1DA08.jpeg
    971E850F-1C33-4ED7-B521-47BC18C1DA08.jpeg
    286.9 KB · Views: 58
  • 9A9E136F-5B8D-47CC-B7D8-B5082009C961.jpeg
    9A9E136F-5B8D-47CC-B7D8-B5082009C961.jpeg
    1.2 MB · Views: 40
  • 7D292E17-8780-4B6C-A374-D028C661DFD3.jpeg
    7D292E17-8780-4B6C-A374-D028C661DFD3.jpeg
    1.2 MB · Views: 36
  • DB2D8E43-9A64-4DE2-B3F5-9E8F0CB1715F.jpeg
    DB2D8E43-9A64-4DE2-B3F5-9E8F0CB1715F.jpeg
    1.7 MB · Views: 36
  • 9F78AA16-7722-4375-871D-952F1CA1C41B.jpeg
    9F78AA16-7722-4375-871D-952F1CA1C41B.jpeg
    1.4 MB · Views: 35
  • 34D305B2-997B-45CD-B831-74A543C51DB2.jpeg
    34D305B2-997B-45CD-B831-74A543C51DB2.jpeg
    1.2 MB · Views: 41
  • 792EC98F-2CA7-45C0-9920-ADA82C3BF3E1.jpeg
    792EC98F-2CA7-45C0-9920-ADA82C3BF3E1.jpeg
    1.9 MB · Views: 49
Last edited:
Probably not, I’m short on time to mess with freight. Sorry.

FZJ80 stuff is all sold.
 
Mind if I ask if you got close to asking price on them? I have a set with similar build except factory locked and don’t want to underprice myself. Thanks

I took $2500 for them. A little more of a hit than I wanted to take. It’s hard to say no sometimes to a guy flashing $100 bills.
 
Top Back Refresh