What's new

Nv4500 23 -> 29 spline

TRINDU

PBB Orphan
Joined
May 19, 2020
Member Number
386
Messages
3,023
Loc
Central TX
I have a later model (98+) NV4500 23 spline. I'm reading conflicting stories. Can I just swap the output? Or what else comes into play?
 
You said you have a 23spl nv4500 and a 29spl 241.

You didnt say you where putting a 23spl behind a 12v.

Since you need to swap input any how you should be able to do the output shaft at the same time nbd.

I was saying just put the 23spl input into the 241, then you said 12v.
 
Since you need to swap input any how you should be able to do the output shaft at the same time nbd.

My mistake for not delving all the info. 1996 dodge CTD auto, I have a 23sp nv4500, want to switcheroo.

Is it as simple as swapping output shafts, or what else is involved?
 
You should be fine just swapping the main shaft. I would buy a rebuild kit and replace the synchros and bearings while you have it apart but thats up to you. I would at the very least buy a rear bearing and race with the new main shaft.
 
Top Back Refresh