NP242 front yoke suggestions

[Skinny]

I'm swapping an NP242HD in my build and I'm looking for a front output that will work with a 1350 CV whether flange or yoke.

It came from a WJ so it had a funky CV flange which is unusable. I tried putting the rear flange that came with my SYE and it hits the shift linkage.

Any recommendations on an output? I'm thinking either a square flange from an 80s Chevy or a 1350 CV yoke. I don't know what fits, assuming any flange that came on a 241 should not only fit but have a pattern that will fit any CV I want.

 

[u2slow]

I would try a 241 flange. The dodge 1350 CV fits those.

 

[Skinny]

Like this one? According to the chart it is 32 spline which should work and mates to a 1350 CV. I would imagine if it fits a 241 it should fit a 242 🤷

QU10935U Used 32 Spline Front Output CV Flange

Buy Now QU10935U Used NP205 Front Output CV Flange used in 1975½-1993 full-size Dodge 4x4 trucks with NP205, NP208, and NP241D Transfer Cases.

torqueking.com

 

[u2slow]

Maybe double check your seal surface?

All my 241 flanges are round. My 205s are square. Same bolt pattern tho. (All dodge)

 

[Skinny]

So weird that the right and left drop 241 cases do not interchange flanges according to this website. Very strange...

This is the RHD which looks like what you have:

TKA10935 32 Spline Front CV Flange for Dodge NP205D, N208D, NP241D, GM NP208C, NP241C

Order your QU10935 front output CV flange today at Torque King. This genuine NPG balanced NP205 front output CV flange works with 1975 1/2 - 1993 full-sized Dodge 4x4 trucks with NP205, NP208, and NP241D transfer cases. Shop for your new Dodge front output CV flange online at Torque King 4x4!

torqueking.com

This is the LHD which I'm assuming would fit my LHD 242:

QU50043 NP241 Transfer Case Front Output CV Flange Yoke

Buy a QU50043 front output CV flange yoke from Torque King 4x4 today. This transfer case front output CV flange yoke is compatible with 1994-1997 NP241DLD and NP241DHD in Dodge Ram 2500 and Ram 3500, Chevy and GMC trucks with NP241 left drop. Order a transfer case front output CV flange yoke...

torqueking.com

 

[arse_sidewards]

So weird that the right and left drop 241 cases do not interchange flanges according to this website. Very strange...

This is the RHD which looks like what you have:

TKA10935 32 Spline Front CV Flange for Dodge NP205D, N208D, NP241D, GM NP208C, NP241C

Order your QU10935 front output CV flange today at Torque King. This genuine NPG balanced NP205 front output CV flange works with 1975 1/2 - 1993 full-sized Dodge 4x4 trucks with NP205, NP208, and NP241D transfer cases. Shop for your new Dodge front output CV flange online at Torque King 4x4!

torqueking.com

This is the LHD which I'm assuming would fit my LHD 242:

QU50043 NP241 Transfer Case Front Output CV Flange Yoke

Buy a QU50043 front output CV flange yoke from Torque King 4x4 today. This transfer case front output CV flange yoke is compatible with 1994-1997 NP241DLD and NP241DHD in Dodge Ram 2500 and Ram 3500, Chevy and GMC trucks with NP241 left drop. Order a transfer case front output CV flange yoke...

torqueking.com

Why would they? The different OEMs all want their own driveshaft bolt pattern on shit.

 

[wvracer821]

I cant remember what jeep its from but I swapped my WJ 242 to a yoke a few years ago. ill try and dig up what i did.

EDIT: Nevermind, I used 1310 stuff and a ZJ front shaft

 

[Skinny]

I did a little digging. The Durango and Hummer run a yoke. Can't find what size Ujoint but I'd guess the Hummer is 1330 or 1350.

I did email Torque King to see if they have any suggestions.

 

[u2slow]

So weird that the right and left drop 241 cases do not interchange flanges according to this website. Very strange...

It's a left drop front flange (95ish) I swapped on the rear of this '90 right hand drop. Dunno if that helps.

 

[Skinny]

Well if it fits without hitting the linkage or should be good for my application 👍