NP 205 mount

[samv3194]

Hello

I'm looking for some advice on mounting my np205, it has an underdrive box in front of it and will be behind a 46re in a second gen dodge ram.
The motor and trans mounts are new factory style. The current mount is shown below. It consists of a bushing welded to a plate which mounts behind the front output cover. My plan is to mount it to its own crossmember. Will having the mount off center of the transmission mount cause any issues?

Thanks for the advice.

 

[RustyC]

The transmission / transfer case mounts should be inline with the crankshaft. The closer the better.
There are a lot of builds with mounts off center a couple of inches. The bushing can take up the deflection to a point.
How far you can push it off center before issues is a gamble.

 

[samv3194]

Thanks!

 

[Winchested]

Cut the mount, add some tube to center it up or get a TMR or ORD mount?

 

[samv3194]

Just ordered a tmr mount so that it will all be aligned.