In tank fuel pump wiring/bulkhead

[TTMotorsports]

OK so I'm going to be installing 2 walbro fuel pumps in my fuel cell and am looking for a wiring plug or way to hook those up and keep it all sealed up. The ones I find as usually just a tight rubber grommet but I would rather have a male/female plug at the top of the cell but I cannot find anything like that

 

[Bebop]

Bulkhead Fuel Pump Harnesses and Connectors

Fuel surge tank pump bulkhead wiring kits

www.radiumauto.com

New E85-Compatible In-tank Wiring Harnesses - Racetronix

November 28, 2013 Revised April 1, 2017 Racetronix introduces its new E85-compatible in-tank wiring harnesses for use with new high-performance pumps and G.M. / Delphi fuel modules FEATURES: Plug & Play with factory bulkhead and pump connectors E85-compatible connectors and Teflon wire Upgraded...

racetronix.com

Fueledbyai - Fuel Pump Power Bulkhead Terminal

The Fueled By AI Fuel Pump Power Bulkhead Terminal (Design Protected) is designed specifically for anyone who is considering upgrading or has upgraded their OEM fuel pump to an aftermarket performance fuel pump (Walbro 255, Walbro 460, Walbro 520, etc). An OEM electrical connector will not...

www.drifthq.com

ATL Fuel Cells CFD-506 ATL Firewall Thru-Wire Bulkheads | Summit Racing

Free Shipping - ATL Firewall Thru-Wire Bulkheads with qualifying orders of $109. Shop Electrical Bulkhead Connectors at Summit Racing.

www.summitracing.com

I'm changing my fuel setup right now and plan to go with a ATL CFD504 and use the standard connector that comes with the pump in order to have a quick way to swap it if needed. Connector will be sunk in the cell, like planned by the manufacturer.

 

[TTMotorsports]

OK thanks. I'm liking the ATL one as well but damn the price of these things are up there. Fuel safe has one I found but no photos and is pricey as well.

Male, 4 Wire Harness with sealed bulkhead style connector for mounting in fill plate, specifically designed for in-tank pumps. Includes ring terminal connectors for connection to Fuel Safe FPHP and FP044 fuel pumps.

Male, 4 Wire Harness with sealed bulkhead style connector for mounting in fill plate, specifically designed for in-tank pumps. Includes ring terminal connectors for connection to Fuel Safe FPHP and FP044 fuel pumps. | Male, 4 Wire Harness with sealed bulkhead style connector for mounting in...

fuelsafe.com

 

[TTMotorsports]

I can connect the pumps together in the tank as well. Does anyone know for sure if heat shrink is fuel compatible or do I need to get a little glass jar of it and put some in there to see how it handles the fuel?

 

[SLOWPOKE693]

I can connect the pumps together in the tank as well. Does anyone know for sure if heat shrink is fuel compatible or do I need to get a little glass jar of it and put some in there to see how it handles the fuel?

I'd try it out in a jar just to be safe.

 

[gt1guy]

The fuel safe 4 wire one looks just like the 2 wire one, with two extra wires.

And this is the matching part for outside the tank.

Wiring Harness, WH04F4

ASA 5700 Female 4 Wire Harness (Outside tank - connects to vechile wiring) - 20" wire lead - 16 gauge positive and negative wire

fuelsafe.com