ProjectTwin
Well-known member
- Joined
- May 22, 2020
- Member Number
- 1193
- Messages
- 444
Been busy as shit lately. Working until 1-3 in the morning and getting back up at 7-8 to start all over again. Made a decent amount of money lately.
Bought a CNC last week. It was delivered Thursday. I assembled it Thursday night, moved it out of the way so I could work through the day Friday, and decided to give it a home on Saturday.
The gnome came to the shop Saturday. I was already in the process of building a storage rack/cabinet for the CNC. He jumped in to help.
Installed a LED light that I took out of the old lathe station.
Below is a time-lapse of a test cut on a baffle for a sub enclosure. I have a deal with a local shop to build enclosures for their brand of subwoofers (Sinful Sounds) so I measured T/S parameters and designed an enclosure.
Since the baffle is 36" long and I have a cut area of 31" x 31", I cut the two subwoofer cutouts in one program then flipped the baffle and ran the 2nd program that cuts the slot port.
The plan is to load the sub cutout program, run it for all of the baffles in the batch, then load the slot port program and cut all the slot ports. Just a matter of swapping material in and clicking "run program".
Bought a CNC last week. It was delivered Thursday. I assembled it Thursday night, moved it out of the way so I could work through the day Friday, and decided to give it a home on Saturday.
The gnome came to the shop Saturday. I was already in the process of building a storage rack/cabinet for the CNC. He jumped in to help.
Installed a LED light that I took out of the old lathe station.
Below is a time-lapse of a test cut on a baffle for a sub enclosure. I have a deal with a local shop to build enclosures for their brand of subwoofers (Sinful Sounds) so I measured T/S parameters and designed an enclosure.
Since the baffle is 36" long and I have a cut area of 31" x 31", I cut the two subwoofer cutouts in one program then flipped the baffle and ran the 2nd program that cuts the slot port.
The plan is to load the sub cutout program, run it for all of the baffles in the batch, then load the slot port program and cut all the slot ports. Just a matter of swapping material in and clicking "run program".
Last edited: