shortbus4x4
Junk collector
She's old and tired but does run and lift. According to my calculations and the local Hyster dealer she is a 1957. Brakes work but plan your stops. I've had it about 14 years and have used it quite a bit in that time. Lifts about 9' high and tilts but no side shift.
Now for the bad. No reverse and forward feels a little funny when you shift it in. I broke something internal like a shifter shaft when I was breaking the rusted up clutch loose. Also without a heavy load the forks stick half way up, I used a comealong to get them past the sticky point, mast cylinder or rollers. Also needs a big piece of round stock for the forks.
The reason I'm getting rid of it is I have a 1984 Hyster that I can get parts for. This could be a good deal for someone mechanically inclined with lots of time and energy. It's located in Post Falls ID and I can deliver for gas money within a days drive. Here's some pictures.
Now for the bad. No reverse and forward feels a little funny when you shift it in. I broke something internal like a shifter shaft when I was breaking the rusted up clutch loose. Also without a heavy load the forks stick half way up, I used a comealong to get them past the sticky point, mast cylinder or rollers. Also needs a big piece of round stock for the forks.
The reason I'm getting rid of it is I have a 1984 Hyster that I can get parts for. This could be a good deal for someone mechanically inclined with lots of time and energy. It's located in Post Falls ID and I can deliver for gas money within a days drive. Here's some pictures.