What's new
By:
Filters
  • Forums will go offline Wednesday Dec 4th at 10AM CST for updates. It's a big update, so the site may be offline for a few hours.

HALP! I need bearings and seals

Johnny Longrifle

Johnny Longrifle

Slow learner
Joined
May 19, 2020
Member Number
147
Messages
436
Loc
Too close to the fawking neighbors
IMG_20240522_174527411.jpg


IMG_20240522_174535557.jpg



IMG_20240522_174515566.jpg



IMG_20240522_174753579~2.jpg



IMG_20240522_174740894~2.jpg


Can anyone point me in the direction of a bearing and seal supplier that can help me with this? Clearly I have all the numbers, but since the last good parts guy around here tipped over dead last week, my local Napa is no damn help. It shouldn't be that hard. If I had a paper catalog in front of me I could probably find what I need relatively easy.

The cone says Bower 3360
Cup says Bower 3320
National seal 204026X lip seal
National seal again 205026 felt dust wiper


Specs are ish

Cone ID 1.370,
WIDTH 1.520 ( It has the large shoulder that is the seal surface

Cup OD 3.135 ish X .940 WD
(had to torch it out of the bore as gently as I could)

IMG_20240522_201755906.jpg



Project is an unknown make (maybe Allis Chalmers) hydraulic disc.
Of course I'm farming so I'm in a goddamn rush. The weeds are growing fast and I need to kill them before they ahold.

I just need a good parts guy. If you are one, hit me up. I'll pay a premium for somebody who knows their stuff.

Thanks in advance.
 

Attachments

  • IMG_20240522_174753579.jpg
    IMG_20240522_174753579.jpg
    2.8 MB · Views: 2
  • IMG_20240522_174753579.jpg
    IMG_20240522_174753579.jpg
    2.8 MB · Views: 3
boydindustrialsupply.com

NEW NO BOX BOWER TAPERED ROLLER CONE BEARING 3360

NEW NO BOX BOWER TAPERED ROLLER CONE BEARING 3360 For questions feel free to contact us. Next Day Air shipping available upon checkout. Next day air orders placed by 3:00PM EST will ship same day. Items purchased with free standard shipping after 10:00AM EST will ship the following business...
boydindustrialsupply.com
 
Steve300xcw said:
No bearing shops in your area?
Click to expand...
Oh hell no. I'm further out in the boonies than you are
Steve300xcw said:
boydindustrialsupply.com

NEW NO BOX BOWER TAPERED ROLLER CONE BEARING 3360

NEW NO BOX BOWER TAPERED ROLLER CONE BEARING 3360 For questions feel free to contact us. Next Day Air shipping available upon checkout. Next day air orders placed by 3:00PM EST will ship same day. Items purchased with free standard shipping after 10:00AM EST will ship the following business...
boydindustrialsupply.com
Click to expand...
Saw that link also. No measurements listed so I'm not gonna buy.

DWT said:
Call these guys up and ask for RB. That old dude can find fawking anything. Adam is good but RB has 30 years experience on him. :laughing:
Screenshot_20240522-193356.png
Click to expand...
Thank you
 
Google bearing supply. Every time I've ever needed one I can find them by inputting the bearing dimensions.


Unless it's Polaris. Fuckers like to make proprietary bearings that are 3mm wider than industry standard. Then they charge $35 for a bearing that exists in either 1mm larger od or 3mm narrower for $9. :mad3:
 
SKF should be able to cross reference it.
www.locateballbearings.com

Bower 3360 Taper

From textile machinery to vehicles, there is always a need for bearings. Let us locate the ball bearings you need from qualified and trusted manufacturers!
www.locateballbearings.com www.locateballbearings.com
 


That doesn't really help you at Napa if they couldn't cross reference them before, but.....


Those should be your bearings.

Give me the shaft O.D., the hub I.D. and the seal thickness and I should be able to find you a seal.


Also, where does this go on the disc? Wheel bearing, disc gang bearing housing, kneutson valve manifold hinge???
 
Last edited:
My local supply house has stock on the bearings, they do business through ebay too though I've never bought anything from them in that way.

I do know they will bend over backward for sales and I'm sure they would overnight you parts.

Get me the seal dimensions and I'll get those quoted if the have them.


Screenshot 2024-05-23 at 11.31.54 AM.png
 
Squatch said:


That doesn't really help you at Napa if they couldn't cross reference them before, but.....


Those should be your bearings.

Give me the shaft O.D., the hub I.D. and the seal thickness and I should be able to find you a seal.


Also, where does this go on the disc? Wheel bearing, disc gang bearing housing, kneutson valve manifold hinge???
Click to expand...
Thanks for the links. I found those same ones on Amazon this morning and ordered them up. I think i got the seal crossed to a number that Orielly had available. It will be 10 days or so until everything shows up. Fingers crossed its the right stuff.

This is one of teh disc gangs where these bearings go.

Squatch said:
My local supply house has stock on the bearings, they do business through ebay too though I've never bought anything from them in that way.

I do know they will bend over backward for sales and I'm sure they would overnight you parts.

Get me the seal dimensions and I'll get those quoted if the have them.


Screenshot 2024-05-23 at 11.31.54 AM.png
Click to expand...
Thanks Squatch! I'll hit these guys up if the Amazon stuff is wrong. I wonder if all these parts are new old stock. I call Bower direct and gave them their part numbers and they had nothing. The seal is the same OD as the 3320 race, and the shaft size is 2.300 just fyi. I came up with a Precision 204035 as the closest sizing.

I'll update this thread when everything shows up, good or bad.


Thanks everybody! :beer:
 
Ok IBB Google experts. Here is your next challenge. Find me this nut. It's a 3.5"-11.5 TPI LH thread.

IMG_20240526_163407968_HDR.jpg


I did find a tag on this piece of equipment. The company who built it is long gone though.

IMG_20240526_121130587.jpg



The nut doesn't have to be exactly as pictured. I'm sure I can cut some washers or whatever to make it work. This is the nut that keeps the discs and spools all held together on the outer tube.

I have four of these gangs that are going to need rebuilt sooner than later. I feel like I am pissing up a rope, but I'm trying to work with what I've got.

IMG_20240526_174413.jpg



Mostly I think I'm just pissing up a rope.
 

Attachments

  • IMG_20240526_163359357.jpg
    IMG_20240526_163359357.jpg
    3.8 MB · Views: 2
You will have sealed your fate if you cant find your bearings..
 
I'm going to bet it's an N or AN18 thread. Bearing shop or industrial supply place may be able to source a left hand thread one.
 
Johnny Longrifle said:
Ok IBB Google experts. Here is your next challenge. Find me this nut. It's a 3.5"-11.5 TPI LH thread.

IMG_20240526_163407968_HDR.jpg


I did find a tag on this piece of equipment. The company who built it is long gone though.

IMG_20240526_121130587.jpg



The nut doesn't have to be exactly as pictured. I'm sure I can cut some washers or whatever to make it work. This is the nut that keeps the discs and spools all held together on the outer tube.

I have four of these gangs that are going to need rebuilt sooner than later. I feel like I am pissing up a rope, but I'm trying to work with what I've got.

IMG_20240526_174413.jpg



Mostly I think I'm just pissing up a rope.
Click to expand...
Are you 100% sure on the size? 3.5x11.5 sounds like you meant 3.527x12
 
You must log in or register to reply here.
Top Back Refresh