Favorite AR armorers wrench?

[Unka-Boo]

Mine disappeared with ex-bro in law...fuck him, but it was a cheap one anyway.
There seems to be a million different kinds now...what are you guys using?

 

[Roc Doc]

Mine disappeared with ex-bro in law...fuck him, but it was a cheap one anyway.
There seems to be a million different kinds now...what are you guys using?

There was a guy on the other site that was making them on a waterjet table, and then pressing in the pins. Works well.

 

[TrikeKid]

I have a set of the crows foot wrenches from Real Avid. They've done anyone I've needed to do.

I started out with a cheapo sheet metal one and while I did put a couple guns together with it it's not nearly as nice to use.

 

[Clb]

Been a coons age but I have a basic unit.
My .02
The more fittings the more versatile

 

[Aisin]

Magpul

 

[total newb]

1 doesnt do it. There are several different sizes and styles of the barrel/muzzel/buffer nuts

Get the fits your gun (not plural) and another to fit the others.

 

[FrankenToy]

Magpul

 

[Aisin]

1 doesnt do it. There are several different sizes and styles of buffer nuts

Do you mean castle nut? Those are all the same style. 99.9% of aftermarket barrel nuts don’t use an armorers wrench in the 1st place. They use a 1-3/16” wrench.

 

[Unka-Boo]

I have both FF and old school style bbl nuts to deal with...have crows foot for FF, so good there. Combo castle nut/bbl nut/flash hider is what Ive been looking at, but want something nicer than the cast chinesium that most of the local shops carry...Magpul seems OK, just curious if there is better without spending a million dollars.

 

[Toreadorranger]

I have a magpul and a separate castle nut wrench I got off amazon.