Downeast 3D custom 3D printed and laser etched products!

92 Green YJ · Mar 5, 2023

To do a proper engrave on something like that you need to use. Fiber laser. I can mark it with the help of a marking compound, but it won’t be A true engraving. I m looking at a fiber laser as my next purchase, but they are spendy

CarterKraft · Mar 5, 2023

CarterKraft said:
Got my stuff, thanks.

Still trying to figure out how this will work but it's gonna be sweet.

cervelorod · Mar 5, 2023

I just got the xtool IR laser, mainly for engraving aluminum, but it should engrave that stainless. Not looking for work, but the new IR module is way cheaper than a fiber laser.

Grendel · Mar 6, 2023

92 Green YJ said:
To do a proper engrave on something like that you need to use. Fiber laser. I can mark it with the help of a marking compound, but it won’t be A true engraving. I m looking at a fiber laser as my next purchase, but they are spendy

On which?

92 Green YJ · Mar 6, 2023

cervelorod said:
I just got the xtool IR laser, mainly for engraving aluminum, but it should engrave that stainless. Not looking for work, but the new IR module is way cheaper than a fiber laser.

Yeah I’ve looked at that. I kind of feel I’d be better served putting that money to a fiber though. It can do a hell of a lot more than the IR module can

92 Green YJ · Mar 6, 2023

Grendel said:
On which?

They are both stainless yes?

92 Green YJ · Mar 25, 2023

Guess it’s been a bit since I’ve posted. Fire academy has been keeping my busy but I’m still cranking away in the studio. Here are some recent projects.

92 Green YJ · Mar 25, 2023

This one I’m quite proud of. I had a customer request a dice tower that looked like the Castle of Lions from the original 1984 Voltron show. So I found a castle dice tower and pulled it into tinkercad and modified it quite a bit to resemble the requested look. Then did some painting in Bambu studio and printed it in 7 colors. Came out amazing!

92 Green YJ · Mar 31, 2023

Getting to be that time of year again! Custom plant tags made to your specifications!

Couple of other recent prints. This amazing dice tower from Cinderwing 3D

And from Hex3D, King Eddie

92 Green YJ · Apr 24, 2023

Finally done with fire academy. Here’s some stuff I’ve been putting out and working on lately.

Several variations on Nintendo Switch game cartridge holders.

Another dice tower

Custom golf cart badges for a local rv park for their rental fleet.

This one is for my personal collection. 3 day print in full color. Lots of supports to remove but so worth it.

And finally, a wearable Death Gun mask

92 Green YJ · Apr 29, 2023

Been busy this week. Here’s some of the stuff I’ve been working on.

Doing an order of 50 of these for a local RV park.

Continuing my mask kick with a Casey Jones TMNT mask

A Hogwarts Legacy duelist mask

A colored version of the Death Gun mask

A Grogrulorian from Nikko Industries

A new dragon from Cinderwing

And finally, some 12 gauge shotgun shell storage containers

92 Green YJ · May 2, 2023

Finished off and delivered my bulk order of 50 laser engraved anodized aluminum license plates to the local RV park today.

Did a couple of extras with their logo on them too in the hopes of getting some more orders from them.

92 Green YJ · May 8, 2023

Some recent prints for your viewing pleasure.
Full size wearable Mandalorian Helmet. This bad boy sold almost as soon as it came off the printer.

Life size replicas of the axe from Assassin’s Creed Valhalla

A large assortment of tabletop and collectible card game accessories

Full color Majin Buu busts

And a completed order of plant tags

mobil1syn · May 27, 2023

CarterKraft said:
2x 7" wide
2x 9" wide should be good.

Can you make one of these too? (just the bottom card)
These are on business card samples. I attached the jpeg of the logo.

92 Green YJ said:
Yes I can. And I have metal business card blanks on hand too.

i got an idea for something similar to this but smaller ~1.5x2.75, you got any in stock for that or cut down one of the larger ones? what format is best for you to work with?

92 Green YJ · May 28, 2023

mobil1syn said:
i got an idea for something similar to this but smaller ~1.5x2.75, you got any in stock for that or cut down one of the larger ones? what format is best for you to work with?

I’ll check around and see if I can find something that size. The metal business cards I have are pretty thin. Not too sure they would cut cleanly (but I’m more than willing to give it a try). Generally SVG is best as it allows the most flexibility to scale and such.

92 Green YJ · May 28, 2023

Some recent projects. Many of these were done in my new Omtech 60 watt CO2 laser.

I laser cut a nice coaster display for my booth for events.

Little Maine themed artwork for my consignment stores as we are entering tourist season.

Some stuff I’m working on for the Machias ATV Jamboree that I will be a vendor at.

And some stuff from the new Zelda game.

92 Green YJ · May 28, 2023

But wait, there’s more!

More Zelda stuff with these Majoras Mask hair pins.

Trying my hand at a layered sign. This will go to the ATV Jamboree as well.

And some stuff for the Central Maine Card Expo that I will be selling at in July. Jumbo wall mount display of Pokémon Red Gameboy cartridge

And some tough card boxes for Magic The Gathering cards. I’ll be making these for Pokémon cards with a poke all on the front as well. So far just the lids done for these. Still have to print the bottoms and the latches.