What's new

Cut and past

6c8ff3b747374772a4691e6312f889d3_zpso9hnjjhx.jpg


6b2b572e28b74259ba79fc28e93c0532_zpst9edkckh.jpg


f17f6ad8e5dd49a3bad9f6d9021ff494_zpswhfqi8r7.jpg


a19ed399a137485a93e220ea1da46da4_zpsq0pa8lmx.jpg
 
Caught up with all the pics. finished covering the trans. Just lots of taks front and back so it wouldn't warp.

20200603_234205.jpg


20200604_000134.jpg


20200604_000242.jpg
 
Last edited:
They are shit batterys these days but thats what my friend has on hand for this thing.

20200604_173430.jpg


20200604_173224.jpg
 
Took a break from the f-toy today and got the pizza cutter's mounted on the weekend driver. It's not a smooth ride anymore but its going to do alot better on the rutted up trails to the river, when I take the kids fishing.

20200606_182840.jpg


20200606_182738.jpg
 
Ya, most people I talk to about it think they are old school and ugly these days.

the runner is perty basic. It's a 87 with about a 4" lift, interior cage, dual cases and fj80 axles.
 
I have gone as far as I can go, my friend needs to throw some more money at it so I can keep going.

dash is mostly done, just need to fill in the corners on the face and fucked up on notching around the v bars so I cut big squares so I can patch them in nice.

20200613_141719.jpg


20200613_141451.jpg


20200613_140727.jpg
 
Last edited:
Added some gussets and cross brace. Couldn't get the brace in the corner without a bend in it to clear for head room. Dont like the idea of that so I moved it in and added big taco gussets in the corners.

20200705_123229.jpg


20200705_123439.jpg


Air tank mounted just waiting for my friend to drop off the compressor. Convicted him to do a switch pod instead off toggles. It's a little more compact and less wiring I have to do over toggles. Box for it is tucked under on the firewall.

20200705_123351.jpg


20200705_123525.jpg


20200705_123647.jpg
 
Last edited:
DAMN that is some VERY nice fab work!!!! Thanks for sharing your build with us.
 
Did not read the link, BUT
Tell us yer hangin the stout body on this....
 
Did not read the link, BUT
Tell us yer hangin the stout body on this....

No, the F-toy just gets some simple sheet skins.

That's on the chopping block next. Just still deciding if I want to toss the body on a 2wd Tacoma or tear my wheeler down and start from scratch with that.
 
Waiting on parts for the f-toy so I started working on the 4runner. Added a seat for the two older kids, just waiting on the harnesses to show to see if I need to add mounting tabs or if they can just wrap around the tubes.

20200714_192040.jpg


20200714_193911.jpg


20200714_194229.jpg
 
Last edited:
Added some down tubes up front.

20200725_202121.jpg

20200725_202054.jpg


got the propane kit so I mounted the regulator. The solenoid was pushing it out way from the firewall more than I liked so its mounted off the the side.

20200725_202151.jpg


20200725_202222.jpg


Start and winch from 12volt guy

20200725_202626.jpg
 
Top Back Refresh