NH Chevy to SAE3 fly wheel housing

[Grendel]

Want to run a big boy transmission? This is how you do it.

150.00 plus the ride.

 

[total newb]

Wheres the 427td it was bolted to?

 

[Grendel]

Wheres the 427td it was bolted to?

Nawp, it wasn't

 

[shortbus4x4]

Interesting. Was it in a C4500 with a gas engine and a manual transmission?

 

[PAE]

What transmission would mate up to that bellhousing or is there another piece missing to mesh up to the transmission?

 

[YotaAtieToo]

Built LS to 13RO?

 

[PAE]

As in a 9 or 10 speed class 8 transmission?

 

[Grendel]

This is the flywheel housing. You can run a SAE3 clutch or torque converter and mate up ANY SAE3 trans to any GM engine with that bolt pattern.

This one was a Duramax to an 7 speed Eaton.

So, yes, LS, Duramax, 6.5L etc.

 

[Grendel]

This really should be in someone else' shed... instead of clogging up mine.

 

[AlxJ64]

Duramax in a Carryall could be cool. I did the measuring once and with a custom accessory drive setup you can fit a 7.3 in there but never measured the dirtymax.

 

[Grendel]

Duramax in a Carryall could be cool. I did the measuring once and with a custom accessory drive setup you can fit a 7.3 in there but never measured the dirtymax.

and someone dumped an SAE3 Allison core with me.

Although was thinking 6.6L L8T

 

[Grendel]

bump....

 

[Grendel]

Still got it.