84-88 0-2" rear lift springs

[TRINDU]

New, junkyard, whatever. What's the new hotness? I was never impressed with 63s and apparently OME are stiff as a board.

Heard rumor 3rd gen leaves will net a small lift?

 

[kschaper75]

Haven't run them but the f150 springs are supposedly better than the 63's as they are a little shorter and flex as much

 

[LowDown]

I've got OME CS010RE in the front of my truck and they flex awesome with the overloads removed. I'd run them in the rear for sure.
They're definitely not stiff as a board.

 

[TRINDU]

I've got OME CS010RE in the front of my truck and they flex awesome with the overloads removed. I'd run them in the rear for sure.
They're definitely not stiff as a board.

This will be in the back of a stripped down 4runner. So trying to guess what I'll end up with with overload removed.

 

[Clb]

The 3rd gens are thick and only 3 leaves
IIrc, I used them in a bastard pac the eyes were goofy also...
Edit
Cuz somebody is gunna counter this!
Come on hero bring the....

 

[YotaAtieToo]

Ome usually offers different capacity springs. If you put high capacity leafs in an empty pickup, it would probably ride bad. I can't imagine any 4runner rear being too light for standard ome leafs, but I don't know what your build is.

Does bds make rear leafs?