What's new

83 shortbox

Clb

another toyota from P.R.K
Joined
May 19, 2020
Member Number
32
Messages
3,762
Loc
First 50 club
Edit 17 june
I posted this before bossman changed the forum title to
Extreme toy off road builds

So forgive me for posting a d.d.

So here she is after a 5 year snooze in the garage...
if this works out, I will go back 10 years and try and do a build thread IF anyone gives 2...

20191004_142520.jpg
 
Last edited:
Click image for larger version  Name:	20191004_153807.jpg Views:	66 Size:	444.3 KB ID:	1692 gotta have a beater for the build... Click image for larger version  Name:	20190925_111516.jpg Views:	65 Size:	105.3 KB ID:	1693 og bobby's fresh inners, new jap knuckle rebuild, new jap wheel bearings, refreshed the asin hubs and put the ( mayhem ? Am4x4 over there I think) dial gaurds back on.
front armor welded up.
Fresh arb and setup.
New cruzier hats and ifs calipers.

20191004_142552.jpg


20190925_144647.jpg
 
Last edited:
Freshed up arb's both ends.
new bearings ect. Thruout.
Rufs and bastard packs fr/rear
It was a dd commuter, till I got it in '02
I dd' it doubled and locked , till 15 when it shit a timing chain east of buck island on the con.
​​​​15 hrs on a strap to airport flats.....
 
same old yota shit everyone has....
W-56
marlin clutch
dual ultimate'$ High angle d.l.'s

After the beaching, I did
Rufs
More lift
14 gallon runner tank swap
22 re swap
Factory a.c.
Front spring hanger for the ruf swap
And....
More to follow as we are going backwards!
In true missfitt fashion:flipoff2:
 
Click image for larger version  Name:	 Views:	0 Size:	349.4 KB ID:	2635 Click image for larger version  Name:	 Views:	0 Size:	126.8 KB ID:	2636 Click image for larger version  Name:	 Views:	0 Size:	152.5 KB ID:	2637 Click image for larger version  Name:	 Views:	0 Size:	294.0 KB ID:	2638 engine roughed in harnes built (stripped?) And laid up.
ecu behind the glove box where the speaker was.
Pinout and color codes were fun.

Fj rotor swap them are brand new (honestly) new calipers.

third rebuilt, new trunnions and bearings, new old stock 30 spline longs .

The poor thing has been a shelf for my riding leathers way to long.
Had the civil war survivor out for cleaning and poser shots.
 
Last edited:
5\84-5\85 ecu

Edit sept. 2020
Funny thing the smog natzi bar'd this as an 86...

20180306_092732.jpg
 
Last edited:
Fought thru the pin out.
made it work.
Got it running today.
Now to fight my WAY thru the smog natzi bullsit in the prk!
 
20200411_101405.jpg - Click image for larger version  Name:	20200405_132930.jpg Views:	0 Size:	368.9 KB ID:	21205
#1 checkin clearance
#3front crossmember\spring hanger in.

20200411_101405.jpg


20200418_152314.jpg
 
Last edited:
Got it buttoned up, dmv website is not making appts.( No tags)
bar appt. Set for referee shenanigans 10 june...
 
Got an appt with the ref on 23 june...run the smog check and component verification.
t case needs a rebuild, 30 mile one way to the ref station.

Good ole fucking marlin
Currently out of stock on bearings:mad3: till perhaps the 20th.
Not custom gearsets bearings!
Oh and Fuck matt

Fuckfuckfuck

Good thing the stealer can have em next day
 
Last edited:
Got an appt with the ref on 23 june...
t case needs a rebuild, 30 mile one way to the ref station.
Good ole fucking marlin
Currently out of stock on bearings:mad3: till perhaps the 20th.
Not custom gearsets bearings!
Oh and Fuck matt

Fuckfuckfuck

You can get bearings cheaper and faster other places than Marlin. I haven’t spent a penny on his shit in 14 years. Fuck those guys.
 
  • Like
Reactions: Clb
Got the cases pulled apart, looks like the hard parts survived.
I only see shading of the rockwell on one bearing.
Gunna list the pn. Of the bearings that get run dry later.

nsk fwj-1931242b fr input to rear output
Nachi 038 russ 1 front idler (may not need)
nachi 63\28 jc3
Nachi 6308 n output shaft
Snapring for same pn to follow
rear output seal. Pn to follow
​​Oring for oil pump pn to follow
Nsk bn 504510 transfer low gear
2 ea nsk bn503507 transfer drive gear

20200612_160706.jpg
 
Last edited:
Those # are not the ones the factory uses.
they won't cross reference...
toyota lists 3 AS nla
Fuck
Tg wants 4 bills plus the ride
Anyone
 
Thank you sir.
unfortunately the individual parts (3-4) are nla no longer available:(
So Here I go like Jonny Cash
One part atta time
 
I believe davezoffroad has kits for $299.
 
Last time I bought a rebuild kit was 2007 when I put a set of duals together. I know I didn’t get it from Marlin, he had already pissed me off at that point. It could have been All Pro or Inchworm.
 
  • Like
Reactions: Clb
Top Back Refresh