8274 to a STOCK TJ front bumper?

[[memphis]]

Does a mount for a 8274 exist for a stock TJ bumper other than Warn?

Ideally I would mount it lower but I suspect the sway bar will be in the way. The Jeep is a bone stock Rubicon and I’d like to keep it relatively stock for my purposes as it is a DD/weekend warrior.

Bolt on mount would be ideal as the winch will be transferred to my 2A eventually

 

[total newb]

Youve never taken the bumper off have you?

There is a 2.5" light wieght steel crossmember/tube right behind it.

You not getting any winch let alone a 8274 lower than the top of the frame on a stock setup.

It tell you to buy a modern low pro smitty built or cut that cross out and fab it it out of 3/16" plate.

 

[[memphis]]

Youve never taken the bumper off have you?

There is a 2.5" light wieght steel crossmember/tube right behind it.

You not getting any winch let alone a 8274 lower than the top of the frame on a stock setup.

It tell you to buy a modern low pro smitty built or cut that cross out and fab it it out of 3/16" plate.

I just picked it up in late February and no I haven’t pulled it. But I was looking at universal plates and universal 8274 mounts and it looks like I can booger those two together for under $250. Better than the $500 Warn wants