IN 50 taper nmtb tool holders

[cj7jeep81]

All sold .


All prices are plus shipping, and will discount if you buy more than one.

Multiple 50 taper end mill holders. One .625, 2 .375 (both missing set screws), one .75, two 1.25 (one with a broken end mill not pictured and way too tight set screws, one good), and one monster 2.5".

Asking $20 a piece for the .625 and .75. $15 each for the .375 since they are missing the screws, $40 for the good 1.25" or 2.5". $30 for the 1.25 that has the broken end mill and set screws that a gorilla tightened.

 

[cj7jeep81]

Beaver tapping head, says model NO TH-1-0. Takes 1.25" tap bushings, and have 7 of them. Some are duplicates, but a variety of sizes (can get the part numbers and measure size). Asking $250 or best offer.

 

[cj7jeep81]

Two 4.75" diameter boring heads. First one has been welded as you can see, and someone engraved "Finish boring only" on the side. Can take a 1" square tool bit horizontally, or 1" round tool bits vertically. Screw moves freely. Asking $100 each or best offer.

This one is very similar, except looks like it can take 1" round tool bits horizontally as well, and no welding repairs. However, this one is pretty stiff to turn the adjustment screw, but does turn. Probably needs a thorough cleaning.

 

[cj7jeep81]

4" face mill that takes round RCKT 1906 inserts. Have 3 partial boxes of inserts, but most look used/abused, but there are a few good ones left. Asking $75 or best offer.

 

[arse_sidewards]

Your prices aren't any better than eBay right now FYI.

 

[cj7jeep81]

Your prices aren't any better than eBay right now FYI.

Feel free to make an offer. I didn't scour Ebay, but tried to price stuff a bit cheaper.

 

[arse_sidewards]

but tried to price stuff a bit cheaper.

The small sized tool holders are priced ok-ish.

The boring heads seem to be priced fairly. I didn't check the face mill. After I saw the price on those inserts I knew it wasn't a face mill I cared about.

BTW I don't need any of those types of tool holders and I'm not going to buy a boring head for a mill that isn't yet under power.

 

[AlxJ64]

The tapping head is what would be on my shopping list but its kinda more than I have to spend currently; the stupid Bobcat is giving me trouble again, and similarly to above, I am a long ways off to having the machine up and running. I have all of the individual holders for various endmills already it seems now that I've sorted out a bunch of tooling. Thanks for posting this stuff up, I just don't have any free floating $ at the moment.

 

[cj7jeep81]

The tapping head is what would be on my shopping list but its kinda more than I have to spend currently; the stupid Bobcat is giving me trouble again, and similarly to above, I am a long ways off to having the machine up and running. I have all of the individual holders for various endmills already it seems now that I've sorted out a bunch of tooling. Thanks for posting this stuff up, I just don't have any free floating $ at the moment.

Yeah, I could be too high on that tapping head, not sure (not much on Ebay). I just bought one for my CNC mill, and paid about $200 for a much smaller import head (no tool holder), and a single collet. Really hard to gauge value on this old stuff, as I'm sure brand new that's over $1k, but things drop in price tremendously.