lpukas2
Maintains those stupid things that fly
Its been a few years since if done engine work. Cam took a shit in my 12 Ram with a 5.7. Getting ready to install new cam, lifters, headers, and MDS delete. What is the best way to get the cam broke in. People are saying to pull the fuel pump fuse and turn the engine over for 10 sec or so to get oil pressure up. The sheet that cam with the new cam (Comp Cams) says to start it ASAP.
Also, any other things I am missing? Run engine around 20 min between 1500-200 RPM and change the oil.
New Hellcat lifters - non MDS
New Comp Cam
Heads have been cleaned and inspected by Machine shop
Headers to replace the shitty stock manifolds
New water pump
MDS delete with plugs and tuner
Will not be replacing the oil pump or timing chain, I cannot rotate the pump to get the pickup tube off of it.
Also, any other things I am missing? Run engine around 20 min between 1500-200 RPM and change the oil.
New Hellcat lifters - non MDS
New Comp Cam
Heads have been cleaned and inspected by Machine shop
Headers to replace the shitty stock manifolds
New water pump
MDS delete with plugs and tuner
Will not be replacing the oil pump or timing chain, I cannot rotate the pump to get the pickup tube off of it.