What's new

CA 43” SX’s on Recentered TWF H1’s SOLD

Status
Not open for further replies.

Diablo169

ROKRAPR
Joined
May 18, 2022
Member Number
5199
Messages
72
First off, these are by far the best Wheel and Tire combo I have ever run. Only reason for selling is I moved up to a 47” TSL.

These were first mounted up in 2016 and have never failed me in any way. They were used on my TJ Juggy and have wheeled all the Ca trails. My Juggy weighs around 4,700lbs and these tires probably have maybe 800 miles total on them, almost all trail miles so rock rash and trail wear is present. Still, they have almost full thread on the center Three Stage Lugs.

I just comp grooved them with the top of the line Van Alstine Groover, and they performed awesome on my last snow run on the con.

Only cosmetic issue, just occurred on my May snow wheeling trip, passenger front right tire must have caught a tree and chipped out a small piece (1”x1”) of the outer sidewall (pictured). I probably don’t even need to mention this as the sidewalls are 8ply and 5/8” thick, and a tire shop can repair it cheaply.

Tires are 43x14.50x16.5 Interco Super Swampers TSL SX’s non sticky.

Wheels are recentered H1 Dual Beadlocks by Trail Worthy Fab with full out rings and flat 3/8 centers with 3” back spacing, Powder coated black with Powder Coated Red Outers, 8-Lug 8x6.5 lug pattern. Should fit all older Ford axles, and Current Chevy and Dodge axles.

I can meet around the Bay Area, Santa Cruz to Sacramento. $2,500

Partial trade for a set of RockWell 2 1/2 tons.

Thank you,

Max

30193DC6-36BF-4E41-938A-609E0DC33BFB.jpeg
A6B1CFB6-E3BD-48AB-B5BB-600D66937BB3.jpeg
C670A217-F0CC-422C-A678-32CB8620AD50.jpeg
6AA6AD03-AD7B-4D07-9E4D-F0162CCF97C7.jpeg
CA51DC86-F9F7-4EB1-9419-8C53B7D32D49.jpeg
EFB2C11F-D7E4-4B80-8A5E-BB1996099A7F.jpeg
AA525871-6E70-4091-B012-DE272265CC53.jpeg
D2B84AEA-0EF2-4A95-AFD6-CA1895AA2F3F.jpeg
9A7595E7-86AD-41AD-B68F-2901D4C14E90.jpeg
3F3399B9-549C-430B-9748-9F7DC3A6F437.jpeg
 
Last edited:
Is $2,500 too much? This set new is like $6k.

Maybe I’ll keep them for a future project lol.
 
If I wasn't broke from moving my shop and they were closer to Iowa I would.
 
Status
Not open for further replies.
Top Back Refresh