spareparts
Red Skull Member
- Joined
- May 21, 2020
- Member Number
- 1015
- Messages
- 46
this has been an on and off again project, that due to recent events(wife cheating on me, filing for divorce), Ive decided to sell and move on with my life. Literally, I'll probably be moving to NC once the settlement can be reached. 1.75 .120 wall DOM tube frame, 124 inch wheel base. Set up for SBC. Has CUCV axles, with full Artec truss, front and rear. 4.56 gears, 10 factory axles, ecgs pucks. Luchbox locker in the D60, Detroit in the 14 bolt. 13 bolt cut, ruff stuff covers. PSC full hydro steering. High steering arms. Disc conversion on rear. All yokes are 1410, Complete front driveshaft, dual slip joints, center carrier bearing, all 1410. Lakewood scatter shield, 32 spline SM465, customer re-clocked adapter, converted 32 spline NP205. Dual stick cable shifter. 4 linked front and rear with 1.25 hiems, 5/8 wall lower links, 1/4 wall uppers. 16 Inch King 2.5 inch remote reservoir shocks, 3 inch Fox bumps. New Raceline 17 inch single bead locks. 43 SX(non stickys) used, about 75% tread. Most of the parts are new in the box and only used for mockup. I've got several boxes of misc parts that go with it. This is probably about 75% finished buggy. I will consider parting out if the axles sell first, last thing i want to do is sell the easy parts then decide to start back on it in a year or so and have to replace those parts. If I sell the axles, I'm committed to selling it all, but I'd rather sell it as a package. Ive got way more than $20,000 in this thing. I'm asking $10,000 for everything. Buggy has been sitting inside my shop, tubing has surface rust, nothing more than surface. I'd consider a trade on a Harley(no sporsters) of equal value. Its time for me to downsize and move on with my life. Located near Charleston SC
