kf4zht
Red Skull Member
- Joined
- May 20, 2020
- Member Number
- 561
- Messages
- 1,012
Leaving my old work I ended up with a bunch of leftovers, including these:
Offically they are for sealing coax connector outdoors. They will handle down to around 3/4" without the foam blockers and 1/4" with the foam. Here is the spec sheet if interested https://www.3m.com/3M/en_US/p/d/b00017576/
But they can be used for a ton of other stuff - Hammer/tool handles, over hoses for extra protection, high voltage (eg sealing a polaris lug), grab handles on tube. They are cold - you pull the tab and it shrinks. No heat gun needed. Here is me covering a hammer handle
Now I have dozens of these and I've wrapped about everything i can think of. New they sell for around $30-40/ea from distribution, but I need them gone. 5 Fit in a MFRB well, so $50 for 5, shipped. If you want more let me know and I can find a cheap way to ship more of them. PP, Venmo, heck I'll even take a check.
Offically they are for sealing coax connector outdoors. They will handle down to around 3/4" without the foam blockers and 1/4" with the foam. Here is the spec sheet if interested https://www.3m.com/3M/en_US/p/d/b00017576/
But they can be used for a ton of other stuff - Hammer/tool handles, over hoses for extra protection, high voltage (eg sealing a polaris lug), grab handles on tube. They are cold - you pull the tab and it shrinks. No heat gun needed. Here is me covering a hammer handle
Now I have dozens of these and I've wrapped about everything i can think of. New they sell for around $30-40/ea from distribution, but I need them gone. 5 Fit in a MFRB well, so $50 for 5, shipped. If you want more let me know and I can find a cheap way to ship more of them. PP, Venmo, heck I'll even take a check.
