What's new

NV 2011 JKU C/O/ Bypasses, SOLD

Status
Not open for further replies.

BLKNBLK

Well-known member
Joined
Jun 24, 2020
Member Number
2162
Messages
65
2011 Jeep Wrangler Unlimited Rubicon. Currant miles 47561
Approx 7000 on complete build.
Wheels and tires all 5 have 1200 miles +-
All oils and filters just changed.


2012 tapshift shifter
Cruise control
Auto AC
Pentastar fan
Big Motech radiator
Custom Aluminum over flow tank
Mocan custom LS swap kit by John Schumacher Overland Performance
Fully loaded Rubicon with every option other than leather, hard top, 730N Media Center, power everything.

AEV vented Hood

2012 Lc9 motor and 6L80e trans had 840 miles on them when bought and modded.
Motor has Comp can, LS7 lifters, valve springs etc.
DOD deleted, VVT Comp cam with phase limiter.
Custom tuned engine and trans.
6l80 4x4 Trans
Both out of a 2012 Tahoe with 840 miles.
R2C Performance Products custom air filter.
Approx 420HP/tq at crank.

Engine custom tuned by Real Performance Speed in Sparks NV
Runs on Reg or Premium


Trans custom tuned by Zero Gravity Mesa AZ

Atlas 2sp 3.8 HD 300m outputs Flat tow capable with cable shifters. 1570 miles since install.
Jeep towing harness installed.

Custom built XD60 with f450 brakes, Pro Steers, Dynalocks, 5.38's and ARB's
Rear PR80 5.38s arb's
All Vented to high mounted billet roll over filtered valves

5ea new 40" Nitto Trail Grapplers on KMC Grenade wheels Beadlocks.

J-flatter's air down valves.

Suspension is all custom:

7075 Aluminum long arm 3 link front.
SAW 14" 2.5" C/O's, SAW 14" 3 tube Bypass shocks. TG Limit straps.
RK Pro Joints

Rear Triangulated cromo uppers with Heims.
Triangulated Lowers cromo fabbed heat treated trailing arms with Heims and Delrin bushings..Frame notched to allow rear C/O and bypass shocks. Built by Phil Licciardi@ Liberty Mountain Fab

Rear 12" SAW 2.5" C/O's and SAW 14" 3 tube Bypass shocks.
2" rear King Bump stops.
15" front travel 18" rear unstrapped.
Shocks modded and custom tuned by Phil Licciardi@ Liberty Mountain Fab.

All brackets 1/4", most fab parts A100 3/16 steel or Chromoly.

TK1 Racing KOH front, rear Currie 1" sway bar. Installed by Phil Licciardi@ Liberty Mountain Fab

PSC steering box, ram, Rez and cooler.

7075 custom tie rod, Currie HD drag link, RK track bar.

Genright 20 gal Aluminum tank and steel skid plate.

Custom 3/16 plate full skid plates by Phil Licciardi@ Liberty Mountain Fab.


Expedition One front bumper with Warn 9.5 CTIS winch and Factor 55 Winch Lock bolt.

Poison Spyder Customs rear bumper (brawler series with swing out rear tire carrier) Custom built tire mount holds a 40.
Poison Spyder Interior Trail Cage
Hard Rock harness bar
Poison Spyder Brawler Rockers
Rigid Dual Rear back up lights

Boom mat sound insulator in Hard top, inside top painted black.
100% Complete interior is Dynomat covered.


Adams frt 1350 cv , rear is a custom by B&W drive-line 1350 cv/1410

Custom stacked plate trans cooler all ran with SS and AN fittings

Carrichs ipad or android holder

Designs 67 carbon fiber mounting system for Ham Kenwood TM-V71A head and Traildash. Ham TM-V71A body and Anytone CB mounted overhead.

Crow 4 point harness plus stock JK belts

ARB compressor mounted behind passenger tail light

Magnaflow 2.5" 400 cfm flow Cats. all 2.5" 304SS with 2ea BORLA mufflers tied to 3" back to a passenger side 4" Magnaflow muffler. All wrapped with Heatsheild muffler wrap. Underbody covered with Heatsheild 2000* stick on.


Bushwacker flat flares
Huskyliner floor mats and cargo area mat
Mopar fuel door and door sill protectors

2ea Full rear Springtail Solutions Molle storage panels with compartments for Battery, Fuel and water.
A custom Aluminum Flat floor from rear to front seats with storage under area where 2nd row seat foot well is.

Sealed 7 Hid Headlights.
2ea Hids with Amber covers
1ea 20" dual pattern LED
2ea front 10w LED rock lights.

Spod with lighted switches.

2ea Hawker Odyssey batteries with Painless dual battery system
All ran with 1AWG copper fine wire welding cable and Military spec connectors.


All glass quartz tinted dark.

Engine, drive-train, all suspension has approx 7000 miles since built.

Comes with all tuning files plus HP tuners. Software and hardware.

Much More not listed.............$85k , part trades...LJ or possible Diesel loaded KL or JT
Located Wellington NV.
 

Attachments

  • 20220115_140808.jpg
    20220115_140808.jpg
    1.8 MB · Views: 305
  • 20210416_144007.jpg
    20210416_144007.jpg
    1.8 MB · Views: 231
  • startup.mp4
    38.3 MB
  • IMG_3148.JPG
    IMG_3148.JPG
    903 KB · Views: 216
  • 20200802_143122.jpg
    20200802_143122.jpg
    1.5 MB · Views: 216
  • 20200704_131117.jpg
    20200704_131117.jpg
    1,016.2 KB · Views: 197
  • 20210425_101025.jpg
    20210425_101025.jpg
    1.4 MB · Views: 221
  • 20210917_161851.jpg
    20210917_161851.jpg
    1.6 MB · Views: 225
Last edited:
Trade for a 780hp, 8 speed paddle shifted race jeep that weighs 2277lbs on 345ZR30's and 335ZR30s?
 
Can a backseat go back in? Do the rear CO/BP’s come in the cab?
 
Thanks but no I'm not trading for a race jeep.

Yes they come into the cab you can see the covers in the picture above showing the dynamat. also this one.
You have 34" between them that you could put a aftermarket bench suspension seat in, then remove the aluminum floor plate for passengers feet
 

Attachments

  • IMG_3466.JPG
    IMG_3466.JPG
    1.4 MB · Views: 126
Damn, that seals it for me… I’ve got triplet boys to fit in the back.

Badass build, GLWS
 
Still available........need a buyer.
I'll be pulling off the wheels and tires and put on my other set as I'm going on the 70th 4 day Jeepers Jamboree.
If anyone wants to see it we will be past the Genright camp on the right a group of 6 or so Jeeps.
 
Few pictures showing back with and without using a rear bench, I didn't remove the platform...

Enough room to fit another bench behind this one if needed.

I'd like to have it sold by the end of the year, "Reasonable" offers will be considered.
 

Attachments

  • 20221204_104904.jpg
    20221204_104904.jpg
    1.3 MB · Views: 18
  • 20221204_103837.jpg
    20221204_103837.jpg
    1.5 MB · Views: 20
  • 20221204_103832.jpg
    20221204_103832.jpg
    1.5 MB · Views: 17
  • 20221204_103826.jpg
    20221204_103826.jpg
    1.7 MB · Views: 16
  • 20221204_103241.jpg
    20221204_103241.jpg
    1.1 MB · Views: 16
  • 20221204_105044.jpg
    20221204_105044.jpg
    1.2 MB · Views: 17
Status
Not open for further replies.
Top Back Refresh