What's new

NH 2005-2012 Ford SD axle cuts

Status
Not open for further replies.

Grendel

Iron Sharpens Iron
Joined
May 19, 2020
Member Number
297
Messages
2,971
Seems like the west has a gap in SD60 builder parts?

If so, boneyards around here are selling axles for 500.00, minus calipers.

We will grab low mileage (under 90K) but can't guarantee that ball joints, bearings and u-joints will be useable. Most will be in good shape.

We are happy to cut the tube at the bracket and send you the C's with a bit of tube left into them, the shaft, the outer knuckle, unit bearing and lock out. As one chunk.

The cut will be between the mounts and the C. Cut takes about 3 mins with a porta-band while rotating the axle.

510 for both sides. 275 for one side.

You manage shipping or pay my kid to do it. Easy to drop on a pallet, weight is about 271lbs for both sides.

Want more or less weight shipped? No problem, still the same price.

I will send the rest to my junk guy.

I have 7 axles I can do this with, right now. To be clear, not making a dime on this, just trying to help y'all with your builds.

The extra 10.00 is to fund a beer and a portaband blade.
 
Status
Not open for further replies.
Top Back Refresh