dave_dj1
Red Skull Member
I have an 01 2500, 5.9 reg cab 4x4 truck with the single headlight bulbs. My problem is that I have no high beams. I installed new headlights when I got the truck a month ago (didn't have highs then either) Low beams work fine. I installed a new multifunction switch on the column, same status. I have narrowed it down to the highs not getting the ground activated when the switch is toggled. I ran a wire to the ground on the headlight plug and they come on :) It's a shared ground between high and low but some where along the way the ground is broken on the high side. What I'm looking for is a wiring diagram from the multiswitch to the light plug. Or a place where I can buy/borrow a schematic. Once I know which wire in the multi switch needs to make a circuit I can run a new wire to the ground with a diode in line. Thank you,
Figured there is more traffic here than in the Dodge section
Figured there is more traffic here than in the Dodge section