0.050" roll pin punch for rear sight

[NotmyJK]

Picked up a Barrett 50 BMG and I need to remove the rear iron sight to move the scope rearward. This requires a 0.050" roll pin to be removed. Where do I find a roll pin punch that size? I looked through the internet with no luck.

 

[FrankenToy]

In a red-neck pinch I've used a finishing nail with the point ground flat or a broken drill bit (seems I have a few broken small bits) inserted into the end of a Chinese grade 5 bolt that I drilled to hold the above mentioned red-neckery punch. Removed a few fwd assists, trigger guards and bhos, easily. Mock it if you must, but it works...

 

[Steve300xcw]

1/16" punch and a second with a flap wheel

I have also used allen wrenches before

 

[jeeptj19992001]

Picked up a Barrett 50 BMG and I need to remove the rear iron sight to move the scope rearward. This requires a 0.050" roll pin to be removed. Where do I find a roll pin punch that size? I looked through the internet with no luck.

Target on garage or neighbors front door?

 

[NotmyJK]

Target on garage or neighbors front door?

Lol, I am in my parents driveway and that is my house and barn. I am laser bore sighting off of one of the relfectors on my trailer.

 

[[486]]

your AK's cleaning kit should have a little itty bitty pin punch in it

 

[cj3a]

The standard answer to all problems is McMaster Carr

 

[NotmyJK]

1/16" punch and a second with a flap wheel

I have also used allen wrenches before

Allen wrench worked great.

 

[Steve300xcw]

Thats goona be fun

 

[NotmyJK]

Thats goona be fun

It is pretty awesome! Picked up 100 more rounds this weekend at a local gun show