Bend-Tech EZ is an entry level tube bending software for the home hobbyist. If your parts are only simple 2D Round Tube parts then EZ will most likely do the trick.
Max bends per part: 6
Designer: Sketch 2D
Choose from dozens of predefined templates. The templates are easy to use and in seconds you will have your design completed and be ready to start bending.
Designer: Custom Part 2D
Create a part by starting at one end and then entering in the distance between bends and the angle at each bend. The length values can be apex or tangent values. Custom Part 2D allows bends to reverse direction (180 degree rotation).
The Material Library includes material shape, size, wall thickness, color, and weight.
Define your dies within the software. Definition includes CLR, Calibrated CLR (stretch factor), and Bend Location Offset.
Bend Calculation Output
Software will provide cut length, bend locations, bend angles, and rotations for every parts you have designed. Each bend location is based from the end of the tube.
Post Bending Cutoff
Cutoff allows extra material to be added at the end of the tube for cutting after bending. The cut length and bend locations are automatically adjusted for cutoff values.
|Bend-Tech software requires an active internet connection in order to activate the license on your computer, and then every 6 months after. SE software can run offline in between.|